Page 71 / 95
Scroll up to view Page 66 - 70
71
DSL-2750B User Guide
Routing
Overview
PPPoE Relay
Check the Enabled box to activate PPPoE relay. Click
OK
to save your settings.
The routing table will display any routes. Check the IGMP Enabled box and check to enable IGMP Fast Leave
and/or IGMP Multicast to Unicast. Click
OK
to save your settings.
Page 72 / 95
72
DSL-2750B User Guide
Universal Plug and Play (UPnP™)
Check this box to broadcast the router to all computers on your local network. You
computer (if UPnP is enabled on your computer) will detect the router as a UPnP
device.
Check this box to have the Gateway automatically remove unused UPnP services.
Select
Publish Only the Main WAN Connection
.
Click
OK
to save your settings.
Allow Other Network
Users to Control Verizon’s
Network Features:
Enable Automatic
Cleanup of Old Unused
UPnP Services:
WAN Connection
Publication:
OK:
Page 73 / 95
73
DSL-2750B User Guide
Maintenance
Reboot
Restore Factory Settings
Click
OK
to reboot the Gateway.
Click
OK
to reset the Gateway to the default factory settings. All rules, users, groups, etc you configured will
be lost.
Page 74 / 95
74
DSL-2750B User Guide
Firmware Upgrade
Visit the Verizon website to download a firmware upgrade file to your computer if available. Click
Browse
and
then navigate to the location of the upgrade file; the path will appear in the window. Next, click
OK
to begin
the upload to your Gateway.
Page 75 / 95
75
DSL-2750B User Guide
Diagnostics
This page will allow you to test different connection using Ping, ARP, Traceroute, PVC Scan, and OAM Ping.
Enter the IP address of your target (destination) and adjust settings if needed, then click
Go
. The results will
appear next to
Status
.
19216811.live