Page 66 / 97
Scroll up to view Page 61 - 65
66
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
ADSL Setting
In this page, you can configure the modem’s ADSL modulation. Select from the settings below and click
Apply
.
Page 67 / 97
67
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
SNMP
Simple Network Management Protocol (SNMP) allows a management
application to retrieve statistics and status from the SNMP agent in this
device.
Check the box marked Enable SNMP Agent to use this feature.
Page 68 / 97
68
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
UPnP
Universal Plug and Play (UPnP) provides compatibility with
networking equipment, software and peripherals.
Check the box marked Enable UPNP support to use this feature.
Page 69 / 97
69
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
TR-069
TR-69 allows a Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device.
Page 70 / 97
70
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
TheStaticRoutepagecanbeusedtoaddaroutingtable(amaximum
of 32 entries can be configured).
To proceed, click
Add
.
Routing
Static Route
For the
Static Route Add
page, enter the destination network
address, subnet mask, gateway and select an available WAN
interface. When complete, click
Apply
.
19216811.live