Page 46 / 97
Scroll up to view Page 41 - 45
46
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
MAC Filter
The web page allows you to create a list of MAC addresses that are banned or allowed association with the wireless access point.
MAC Restrict
Mode:
Add a MAC
Access Control:
Remove a MAC
Access Control:
Click
Save/Apply
to add the MAC address to the list.
The function can be turned on/off, select
Disabled
to disable this
function. Vice versa, to enable the function. After enabling the
function, you can filter wireless users according to their MAC address,
either allowing or denying access. Select
Allow
to make any wireless
MAC address in the Wireless Access Control List can be linked to. And
select
Deny
to ban any wireless MAC address in the Wireless Access
Control List.
To add a new MAC address to your wireless MAC address filters, click
Add
to show the next page. Type the MAC Address in the entry field
provided.
SelectthecheckboxintherightcolumnofthelistfortheMACaddress
to be removed and click
Remove
.
Page 47 / 97
47
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
Wireless Bridge
TheWireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or moreWDS-enabled devices
into your wireless network. You can only establish WDS links with WDS-enabled devices.
AP Mode:
Bridge Restrict:
Select Access Point’s functionality to be Access Point or pure Wireless
Bridge. You can select Wireless Bridge (also known as Wireless
Distribution System) to disables access point functionality. Selecting
Access Point enables access point functionality and Wireless bridge
functionality will still be available and wireless stations will be able to
associate to the AP.
Select Disabled to turn off wireless bridge restrictions. Any wireless
bridge will be granted access. Selecting Enabled or Enabled (Scan)
enables wireless bridge restriction. If enabled, only the specified
bridges are granted access.
Click
Save/Apply
to configure the wireless bridge options and put the modifications
into effect.
Page 48 / 97
48
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
Wireless QoS
This page allows you to control the wireless traffic QoS rule which consists of a class name and at least one condition.
Page 49 / 97
49
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
Port Forwarding
Port forwarding allows you to direct incoming traffic from the WAN side to the internal server with a private IP address on the LAN side.
Page 50 / 97
50
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 7 - Advanced Setup
Select the
Service Name
and enter the IP server Address, then click
Apply.
19216811.live