Page 66 / 88
Scroll up to view Page 61 - 65
DSL-2730B User Manual
Click
Add
. The page shown in the following figure appears.
63
Page 67 / 88
DSL-2730B User Manual
4.4.10.6 UPnP
Choose
ADVANCED
>
Network Tools
and click
UPnP
. The page shown in the
following figure appears.
In this page, you can configure universal plug and play (UPnP). The system
acts as a daemon after you enable UPnP.
UPnP is used for popular audio visual software. It allows automatic discovery of
your device in the network. If you are concerned about UPnP security, you can
disable it. Block ICMP ping should be enabled so that the device does not
respond to malicious Internet requests.
Click
Apply
to save the settings.
4.4.10.7 ADSL
Choose
ADVANCED
>
Network Tools
and click
ADSL Settings
. The page
shown in the following figure appears.
In this page, you can select the DSL modulation. Normally, you can keep the
factory default setting. The device negotiates the modulation mode with
DSLAM.
Click
Apply
to save the settings.
64
Page 68 / 88
DSL-2730B User Manual
4.4.10.8 SNMP
Choose
ADVANCED
>
Network Tools
and click
SNMP
. The page shown in the
right figure appears.
In this page, you can set SNMP parameters.
Read Community
: The network administrator must use this password to
read the information of this device.
Set Community
: The network administrator must use this password to
configure the information of this device.
Trap Manager IP
: The trap information is sent to this host.
Click
Apply
to save the settings.
65
Page 69 / 88
DSL-2730B User Manual
4.4.10.9 TR-069
Choose
ADVANCED
>
Network Tools
and click
TR-069
. The page shown in
the following figure appears.
In this page, you can configure the TR-069 CPE.
WAN Management Protocol (TR-069) allows a Auto-Configuration Server
(ACS) to perform auto-configuration, provision, collection, and diagnostics to
this device.
In this page, you may configure the parameters such as the ACS URL, ACS
password, and connection request user name.
After finishing setting, click
Apply
to save and apply the settings.
4.4.10.10
Certificates
Choose
ADVANCED
>
Network Tools
and click
Certificates
. The
Certificates
page shown in the following figure appears. In this page, you can configure local
certificate and trusted certificate.
66
Page 70 / 88
DSL-2730B User Manual
4.4.11
Routing
Choose
ADVANCED
>
Routing
. The page shown in the following page
appears.
4.4.11.1 Static Route
Choose
ADVANCED
>
Routing
and click
Static Route
. The page shown in the
following figure appears. This page is used to configure the routing information.
In this page, you can add or delete IP routes.
67
19216811.live