Page 61 / 88 Scroll up to view Page 56 - 60
DSL-2730B User Manual
4.4.10.1 Port Mapping
Choose
ADVANCED
>
Network Tools
and click
Port Mapping
. The page
shown in the following figure appears.
In this page,
you can bind the WAN
interface and the LAN interface to the same group.
58
Page 62 / 88
DSL-2730B User Manual
Click
Add
to add port mapping. The page shown in the following figure appears.
The procedure for creating a mapping group is as follows:
Step 1
Enter the group name.
Step 2
Select the WAN interface for your new group.
Step 3
Select LAN interfaces from the
Available Interface
list and click the
<-
arrow button to add them to the grouped interface list, in order to
create the required mapping of the ports. The group name must be
unique.
Step 4
Enter the option information of DHCP vendor IDs.
Step 5
Click
Apply
to save the settings.
59
Page 63 / 88
DSL-2730B User Manual
4.4.10.2 IGMP
Choose
ADVANCED
>
Network Tools
and click
IGMP
. The page shown in the
following figure appears. When enable IGMP Snooping, the multicast data
transmits through the specific LAN port which has received the request report.
4.4.10.3 Quality of Service
Choose
ADVANCED
>
Network Tools
and click
Quality of Service.
The page
shown in the following figure appears.
In this page, you can enable/disable the QoS. Click
Save/Apply
to take the
setting effect.
60
Page 64 / 88
DSL-2730B User Manual
4.4.10.4 Queue Config
Choose
ADVANCED
>
Network Tools
and click
Queue Config
. The page
shown in the following figure appears.
Click
Add
. The page shown in the following figure appears.
Click
Save
/
Apply
to save the settings.
61
Page 65 / 88
DSL-2730B User Manual
4.4.10.5 QoS Classification
Choose
ADVANCED
>
Network Tools,
and click
QoS Classification
, the page
shown in the following figure appears.This page allows you to config various
classification.
62

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top