Page 21 / 67
Scroll up to view Page 16 - 20
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
WAN Status
The
Status / WAN status
page displays active WAN connections.
Figure 14. The
Status / WAN status
page.
Page
21
of 67
Page 22 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
DHCP
The
Status / DHCP
page displays the information on computers that have been identified by
hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as
well as the IP address expiration periods (the lease time).
Figure 15. The
Status / DHCP
page.
Page
22
of 67
Page 23 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Routing Table
The
Status / Routing table
page displays the information on routes. The table contains
destination IP addresses, gateways, subnet masks, and other data.
Figure 16. The
Status / Routing table
page.
Page
23
of 67
Page 24 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
LAN Clients
On the
Status / LAN clients
page, you can view data on network devices connected to the router.
The page displays devices connected to the router's LAN and devices accessing the web-based
interface of the router.
Figure 17. The
Status / LAN clients
page.
For each device the following data are displayed: the IP address, the MAC address, and the
interface to which the device is connected.
Page
24
of 67
Page 25 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Net
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
Connections
On the
Net
/ Connections
page, you can create and edit connections used by the router.
By default, the
LAN
connection is configured in the system. It corresponds to the local interface of
the router (
br0
). You cannot delete this connection.
Figure 18. The
Net / Connections
page.
To create a new connection, click the
Add
button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the
Save
button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the
Delete
button.
To use one of existing WAN connections as a default gateway, select the choice of the
Default
gateway
radio button located in the line corresponding to this connection.
Page
25
of 67
19216811.live