DSL-2520U

ADSL2/2+ Router with USB and Ethernet Ports

User Manual

Overview

Delivery Package

The following should be included:

•

Router DSL-2520U

•

Power adapter DC 5V/1A

•

RJ-11 telephone cable

•

Straight-through Ethernet cable (CAT 5E)

•

USB cable

•

Splitter

•

CD-ROM with “

User Manual

” and “

Quick Installation Guide

”

•

“

Quick Installation Guide

” (brochure).

!

Using a power supply with a different voltage rating than the one included will cause

damage and void the warranty for this product.

Safety Instructions

Place your router on a flat horizontal surface or mount the router on the wall (the mounting holes

are located on the bottom panel of the device). Make sure that the router is provided with sufficient

ventilation.

To prevent overheating, do not obstruct the ventilation openings of the router.

Plug the router into a surge protector to reduce the risk of damage from power surges and lightning

strikes.

Operate the router only from an electrical outlet with the correct power source as indicated on the

adapter.

Do not open the cover of the router. Otherwise any warranty will be invalidated.

Unplug the equipment before dusting and cleaning. Use a damp cloth to clean the equipment. Do

not use liquid/aerosol cleaners or magnetic/static cleaning devices.

Page

11

of 67

DSL-2520U

ADSL2/2+ Router with USB and Ethernet Ports

User Manual

Installation and Connection

CHAPTER 3.

INSTALLATION AND CONNECTION

Before You Begin

Please, read this manual prior to installing the device. Make sure that you have all the necessary

information and equipment.

Operating System

Configuration of the router DSL-2520U (hereinafter referred to as “the router”) is performed via the

built-in web-based interface. The web-based interface is available from any operating system that

supports a web browser.

Web Browser

The following web browsers are recommended: Windows Internet Explorer, Mozilla Firefox or

Opera.

For successful operation, JavaScript should be enabled on the web browser. Make sure that

JavaScript has not been disabled by other software (such as virus protection or web user security

packages) running on your computer.

NIC (Ethernet Adapter)

Any computer that uses the router should be equipped with an Ethernet adapter (NIC). If your

computer is not equipped with such a device, install an Ethernet adapter prior to using the router.

Page

12

of 67

DSL-2520U

ADSL2/2+ Router with USB and Ethernet Ports

User Manual

Installation and Connection

Connecting to PC (in OS Windows XP)

PC with Ethernet Adapter

1.

Make sure that your PC is powered off.

2.

Connect an Ethernet cable between the Ethernet port located on the back panel of the router

and the Ethernet port of your PC.

3.

Connect a phone cable between the DSL port of the router and the

ADSL OUT

port of the

splitter. Connect your phone to the

PHONE

port of the splitter. Then connect another phone

cable between a phone jack and the

ADSL IN

port of the splitter.

4.

Connect the power cord to the power connector port on the back panel of the router, then

plug the power adapter into an electrical outlet or power strip.

5.

Turn on your PC and wait until your operating system is completely loaded.

PC with USB Port

!

Do not connect your router to your PC until the USB driver is installed.

1.

Turn on your computer and wait until the operating system is completely loaded. Insert the

CD from the router's delivery package into the CD ROM drive. Open the disk and go to the

USBDriver

folder, then run the

setup.exe

file. Wait until the USB driver is installed.

When the installation is completed, click the

Finish

button.

2.

Connect a phone cable between the DSL port of the router and the

ADSL OUT

port of the

splitter. Connect your phone to the

PHONE

port of the splitter. Then connect another phone

cable between a phone jack and the

ADSL IN

port of the splitter.

3.

Connect the power cord to the power connector port on the back panel of the router, then

plug the power adapter into an electrical outlet or power strip.

4.

Connect the USB cable between the USB port located on the back panel of the router and

the USB port of your PC.

Page

13

of 67

DSL-2520U

ADSL2/2+ Router with USB and Ethernet Ports

User Manual

Installation and Connection

Obtaining IP Address Automatically

1.

Click the

Start

button and proceed to the

Control Panel > Network and Internet

Connections > Network Connections

window.

2.

In the

Network Connections

window, right-click the relevant

Local Area Connection

icon and select the

Properties

line in the menu displayed.

Figure 3. The

Network Connections

window.

3.

In the

Local Area Connection Properties

window, on the

General

tab, in the

This

connection uses the following items

section, select the

Internet Protocol (TCP/IP)

line. Click the

Properties

button.

Figure 4. The

Local Area Connection Properties

window.

Page

14

of 67

DSL-2520U

ADSL2/2+ Router with USB and Ethernet Ports

User Manual

Installation and Connection

4.

Select the

Obtain an IP address automatically

radio button. Click the

OK

button.

Figure 5. The

Internet Protocol (TCP/IP) Properties

window.

Click the

ОК

button. Now your computer is configured to obtain an IP address automatically.

Page

15

of 67