1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-2520U
    5. /
  5. 9
Page 41 / 67 Scroll up to view Page 36 - 40
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Figure 30. The page for adding a DDNS service.
You can specify the following parameters:
Parameter
Description
DDNS Service
Select a DDNS provider from the drop-down list.
Host name
The domain name registered at your DDNS provider.
User name
The username to authorize for your DDNS provider.
User password
The password to authorize for your DDNS provider.
Interface
Select a WAN connection which IP address will be used to access
the DDNS service.
Click the
Change
button.
To edit parameters of the existing DDNS service, click the relevant service link. On the opened
page, change the needed parameters and click the
Change
button.
To remove an existing DDNS service, click the relevant service link. On the opened page, click the
Delete
button.
Page
41
of 67
Page 42 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
DNS
On the
Advanced / DNS
page, you can add DNS servers to the system.
Figure 31. The
Advanced / DNS
page.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
The device performs the DNS relay function, i.e., it redirects the DNS requests of users to external
DNS servers. You can specify the addresses of DNS servers manually on this page, or configure the
router to obtain DNS servers addresses automatically from your ISP upon installing a connection.
!
When you use the built-in DHCP server, the network parameters (including DNS servers)
are distributed to clients automatically.
If you want to configure automatic obtainment of DNS servers addresses, deselect the
Manual
checkbox, select a WAN connection which will be used to obtain addresses of DNS servers
automatically from the
Interface
drop-down list, and click the
Change
button.
If you want to specify the DNS server manually, select the
Manual
checkbox and enter a DNS
server address in the
Name servers
list. To specify several addresses, press the Enter key and
enter a needed address in the next line. Then click the
Change
button.
To remove a DNS server from the system, remove the relevant line from the
Name servers
field
and click the
Change
button.
Page
42
of 67
Page 43 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Routing
On the
Advanced / Routing
page, you can add static routes (routes for networks that are not
connected directly to the device but are available through the interfaces of the device) into the
system.
Figure 32. The
Advanced / Routing
page.
To create a new route, click the
Add
button.
Page
43
of 67
Page 44 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Figure 33. The page for adding a static route.
You can specify the following parameters:
Parameter
Description
Destination network
A destination network to which this route is assigned.
Destination netmask
The destination network mask.
Gateway
An IP address through which the destination network can be
accessed.
Metric
A metric for the route. The lower the value, the higher is the route
priority.
Optional
.
Via Interface
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the
<Auto>
value of this drop-down list, the router itself
sets the interface on the basis of data on connected networks.
Click the
Save
button.
To edit an existing route, select the needed route in the table. On the opened page, change the
needed parameters and click the
Save
button.
To remove an existing route, select the needed route in the table. On the opened page, click the
Delete
button.
Page
44
of 67
Page 45 / 67
DSL-2520U
ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
ADSL
The
Advanced / ADSL
page includes the set of ADSL standards that should be defined by an
ISP. Contact your ISP to set proper parameters. Select the relevant options and click the
Change
button.
Figure 34. The
Advanced / ADSL
page.
Page
45
of 67

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top