Page 16 / 41
Scroll up to view Page 11 - 15
13
6.14
MAC Address
This menu displays the MAC address. User cannot modify MAC address.
6.15
Version
Version menu displays the firmware version. You cannot modify the version number.
6.16
Language Selection
The VoIP Phone (model no. DPH-140S) supports two languages: Japanese and English.
6.17
Time Format
You may select the 12hr or 24hr time format.
•
Press
•
MAC address
is displayed on the screen
•
Press
•
Firmware
version
is displayed on screen
MAC Address:
00D0E9017DB
Version:
V: 02.08
•
Press
Mute/Func.
followed by
•
Use
or
to select the preferred language
•
Press
when done
Language:
English
•
Press
Mute/Func.
followed by
•
Use
or
to select the time format
•
Press
when done
Time Format:
24Hours
Page 17 / 41
14
6.18
Volume Adjustment
6.18.1 Ringer Volume
While the handset is in place,
•
Press
to increase the ringer volume and
to decrease the
ringer volume
6.18.2 Speaker Volume
While the handset is in place,
•
Press
•
Press
to increase the speaker volume and
to decrease the
speaker volume
6.18.3 Handset Volume
•
Pick up the handset and press
to increase the volume or press
to decrease the volume
Page 18 / 41
15
7.0 USING THE CONFIGURATION MENU
The configuration menu can be accessed using a web browser. Some advanced functions such as
CF Unconditional, CF User Busy and CF No Answer must be setup from the web browser.
7.1
Accessing Configuration Menu
•
Open the web browser (ie. Internet
Explorer, Netscape…)
•
Type in the
IP Address
of the phone
followed by :9999
IP address is provided by your Internet Service Provider (ISP). If your ISP supports DHCP, you
may obtain the IP address from you phone. Press MENU and scroll down to IP address.
•
Enter
User Name
and
Password
(leave
User Name and Password blank if you
are installing the phone for the first
time)
•
Click
OK
7.2
Web Login Setting
Page 19 / 41
16
User Name
Configuration menu login name.
Password
Configuration menu login password.
NTP Server IP
Network Time Protocol (NTP) is a protocol used to help
match your system clock with an accurate time source (eg
atomic clock, server). It is good practice to have all your
networked computers synchronized with one server.
Time Zone
Select your time zone. If there is daylight saving in your
area, click the check box.
TFTP Server
Enable or disable TFTP server to allow transfer of files
from a computer to the IP phone.
FTP Client
Enable or disable IP phone to download files from FTP
server and update the firmware automatically.
Remote Config Password
Remote password to access the configuration menu from
VoIP software. (You may download this software from
your supplier’s website). Default password is 1234.
7.3
Management Setting – Restore Factory Setting
Click on Management. Select Restore Factory Setting and the above screen will display on the
screen.
Restore Factory Setting
Restores all the settings back to factory default settings.
Page 20 / 41
17
7.4
Management Setting – Firmware update
FTP server, login ID, login password and firmware filename are preset when you purchase the
phone. These are required to download and update the firmware.
FTP Server
FTP Server address.
Login ID
Login ID provided by your supplier.
Login Password
Login password provided by you supplier.
Firmware Filename
Updated firmware filename. Do not change the file name
unless specified by your supplier.
7.5
Network Setting – DHCP
Select DHCP if you have cable internet.
DHCP Server
Dynamic Host Configuration Protocol (DHCP) Server
address. This IP address information is obtained
automatically from your ISP.
DNS Server
DNS address is provided by your ISP.
19216811.live