Page 11 / 41
Scroll up to view Page 6 - 10
3
DISABLE ADSL Dialup
6.4
DHCP (Dynamic Host Configuration Protocol)
DHCP allows the network administrator to distribute IP addresses when a computer is plugged
into a different place in the network. If your ISP provides static IP address, you must disable
DHCP and enter the IP address provided.
ENABLE DHCP
1
2
•
Press
•
Enter ADSL password
•
Press
•
Press
to select
DISABLE
ADSL Password:
*******
ADSL DIALUP:
DISABLE
•
Press
•
Use
or
to set DHCP to
ENABLE
•
Press
•
IP address automatically acquired
DHCP:
ENABLE
IP Address:
61. 63. 83. 96
Page 12 / 41
9
3
4
DISABLE DHCP
1
2
•
Press
•
Subnet mask automatically acquired
Subnet Mask:
255.255.254.
0
•
Press
•
Use
or
to set DHCP to
DISABLE
•
Press
•
Enter the IP address
•
Press
•
Router IP automatically acquired
Router IP:
61. 63. 83.254
DHCP:
DISABLE
IP Address:
061.063.083.019
Page 13 / 41
10
3
4
6.5
DNS Server IP
The domain name system (DNS) is the way that Internet domain names are located and
translated into Internet Protocol addresses. There is probably a DNS server within close
geographic proximity to your ISP that maps the domain names in your Internet requests or
forwards them to other servers in the Internet.
6.6
SNTP Server IP
Simple Network Time Protocol (SNTP) is a protocol used to help match your system clock with
an accurate time source. If you do not know your SNTP Server IP, please ignore this section.
SNTP Server IP address can be either URL or IP.
•
Press
•
Enter the subnet mask
•
Press
•
Enter the router IP address
Subnet Mask:
255.255.254.000
Router IP:
061.063.082.019
•
Press
•
Enter SNTP server IP or URL
SNTP Server IP:
216.133.140.78
•
Press
•
Enter DNS server IP
DNS Server IP:
061.063.082.001
Page 14 / 41
11
6.7
Do Not Disturb
This setting allows the user to reject all incoming phone calls.
6.8
CF (call forward) Unconditional
Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to
disable.
You will need to use a web-browser to input the forwarded phone number. Refer to
section 7.0 for more information on call forwarding.
6.9
CF (call forward) User Busy
Forward all the incoming calls to another number when user is busy on the phone.
6.10
CF (call forward) No Answer
Forward all incoming calls to another phone number after a certain number of rings.
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
Do Not Disturb:
DISABLE
CF Unconditional:
DISABLE
CF User Busy:
DISABLE
CF No Answer:
ENABLE
Page 15 / 41
12
6.11
Anonymous Call
Enables the caller (user) to hide the name and phone number from the receiver.
6.12
Anony Call Rej (Anonymous Call Rejection)
Reject any anonymous incoming calls.
6.13
Ringing Type
Select the ring tone. There are four ring tones in total.
NOTE:
At this point, you may save the settings and exit. The next two sections explain how to
obtain the MAC address and firmware version.
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
•
Press
•
Use
or
to select the ring type
Anony Call Rej:
DISABLE
Ringing Type:
Ringing4
•
Press
to exit menu
•
When asked to save or cancel, press
to
SAVE
•
Press
•
Use
or
to select
ENABLE
or
DISABLE
Anonymous Call:
ENABLE
19216811.live