Page 26 / 76
Scroll up to view Page 21 - 25
26
Using the Web Configuration (continued)
Tools > Upgrade
Firmware Upgrade
When a new version of firmware is available (e.g., downloaded from the
manufacturer’s web site), you can upgrade the firmware of your print server. Click
Browse
to locate the firmware file, then click
Apply
.
Page 27 / 76
27
Using the Web Configuration (continued)
Tools > Backup
Backup Device Configuration to File
Click
Apply
to backup your current configuration of the print server to file and
then save in the computer.
Restore Device Configuration from File
You can reload a configuration that you saved before. Click
Browse
to point to
the backup file, and then click
Apply
.
Page 28 / 76
28
Using the Web Configuration (continued)
Help
Click on the
Help
link from the tools bar of the main screen to enter the Help Page.
It provides a link to D-Link’s support web site. D-Link’s support web site will provide
the most up to date information on your DP-G301 Print Server. Please check the
web site regularly for product and firmware updates.
Page 29 / 76
29
TCP/IP Printing for Windows XP
Open the web browser, and type in the IP Address of the DP-G301.
For example, type
into the
Location
or
Address
field. Press
the
Enter
or
(Return)
Key.
Note:
The PC’s IP Address must be in the same subnet as the Print Server’s IP
Address for the two devices to communicate. (For example, if your Print
Server’s IP Address is
192.168.0.10, with a subnet mask of 255.255.255.0,
then your computer’s IP Address should be 192.168.0.x, where x is a value
between 1-254, excluding 10.) See
Networking Basics: Assigning a Static IP
Address
in this manual to find out how to change an IP Address.
Page 30 / 76
30
TCP/IP Printing for Windows XP
(continued)
At the
Configuration
window,
write down the
Port Name
for future reference.
You will need this information later in the configuration process.
19216811.live