D-Link DP-G301 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 76 Scroll up to view Page 11 - 15

16

Conﬁguration

Click on the

Conﬁguration

tab from the tools bar of the main screen to enter the

conﬁguration page; it provides the conﬁguration options that include

System De-

vice

and

Port Setting

System Device and Port Setting

This option will show you settings required to conﬁgure the DP-G301 Print Server.

Consult your printers owner manual for the PJL(Printer Job Language) and print

speed supported on your printer. Click the

Save

button on the bottom of the con-

ﬁguration

page to ensure the settings are updated and saved.

Using the Web Conﬁguration (continued)

Page 17 / 76

17

Using the Web Conﬁguration (continued)

Conﬁguration > System Device and Port Setting

Server Name:

Assign a name to the print server.

Location (optional):

Assign a location for the print server.

Admin contact (optional):

Assign the Admin’s contact name for the print server.

Port Settings

In this ﬁeld, you can assign the

Port Name

for the print server, and the description

for the parallel port. It also allows you to select the

PJL Printer

setting (Yes or

System Device

In this ﬁeld, you can conﬁgure the basic information of your print server.

Password:

Enter the Administrator password (3-8 characters). To set up the

password, please enter the password in the

New

Password box, and then enter

the same one again in the

Conﬁrm Again

box.

NOTE:

PJL (Print Job Language) has certain job requirements that must be met to

work correctly. for more information, please refer to your printer’s manual.

Conﬁguration > Wireless

Page 18 / 76

18

Connection Mode:

Select one of two connection modes:



Infrastructure (default):

Connect to an existing wireless AP or

router in a WLAN.



Ad-Hoc:

Connect to wireless clients in the Peer-to-Peer mode.

Using the Web Conﬁguration (continued)

Conﬁguration > Wireless

SSID:

Assign the SSID in this box. You can manually input the name or select one

from the pull-down menu. To search the available print server within the network,

click the

Site Survey

button.

Wireless Channel:

Select the channel from the pull-down menu. The default

setting is

6

.

Transmission Rate:

Select the data transmit rate from the pull-down menu. The

default setting is

Fully Automatic

.

Wireless Interface

WEP Encryption

This ﬁeld allows you to conﬁgure the settings of data encryption. Please remember

that the WEP key must be set before the data encryption is enforced.

WEP Encryption:

This option allows you to select

Disable

,

64-bit

, and

128-bit

for

encryption setting.

WEP Key Format:

You can decide the network key to be encoded by ASCII

(ASCII characters) or HEX (hexadecimal digitals). 64-bit WEP encryption uses a 10

hexadecimal character key. The WEP encryption key must match the WEP settings

on your AP or wireless router to connect properly.

Then, enter the key(s) for the network in the Key box (1-4).

Advanced Setting

Beacon Interval:

Enter the number for the beacon interval in milliseconds.

Preamble:

This option allows you to set the length of the preamble. Setting options

are:



Long:

set to 144 bits



Short:

set to 72 bits.

Authentication Type:

You can set the authentication type by selecting the settings:

Open System, Shared Key, and Both.

Page 19 / 76

19

Using the Web Conﬁguration (continued)

Network

Page 20 / 76

20

Using the Web Conﬁguration (continued)

Conﬁguration > Network

TCP/IP

This ﬁeld contains three options that allow you to conﬁgure the TCP/IP setting:

IP Address:

This option allows you to set the IP address manually or automatically.

When you choose

Manually Assign

, you should enter the related information in

the following boxes, including

IP Address

,

Subnet Mask

, and

Default Gateway

.

UPnP:

This option allows you to enable or disable UPnP mode.

MAC Rendezvous:

This option allows you to enable or disable MAC Rendezvous

mode.

WEP Encryption:

This option allows you to select

Disable

,

64-bit

, and

128-bit

for

encryption setting.

Microsoft Network

Enter the name of the Workgroup that you want the print server associated with in

this ﬁeld.

AppleTalk

Enter the AppleTalk Zone name in the box. In the following options, enter the related

conﬁguration, such as the printer type.

LPT

Chooser Name:

Display the print server name.

Printer Type

: Enter the printer’s type in this box.

PostScript Level:

Select from the pull-down menu (Level 1 or Level 2).

Font Group:

Select from the pull-down menu.

TIP:

Once you have changed the settings in each option, click Apply to store the

settings.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share