Page 6 / 76 Scroll up to view Page 1 - 5
6
Rear Panel LED Indicator / Connectors
Power
A steady lit LED indicates proper operation of the Print
Server.
ACT
A steady lit LED indicates proper wired or wireless network
connection. A flicker LED indicates acitivity (configuation or
printing)
LPT
A steady lit LED indicates your Parallel printer is printing.
Network Cable Connector
The Print Server rear panel has a LAN port for CAT5 Ethernet
cabling. The port supports the NWay protocol, allowing the Print
Server to automatically detect or negotiate the transmission
speed of the network.
DC Power Connector
The DC power input connectors is located on the Print Server’s
rear panel and is labeled DC 5V.
Power connector
LPT
Antenna
Ethernet
ACT
Power
Page 7 / 76
7
D-Link
wireless products are based on industry standards to provide easy-to-use
and compatible high-speed wireless connectivity within your home, business or
public access wireless networks. D-Link wireless products will allow you access
to the data you want, when and where you want it. You will be able to enjoy the
freedom that wireless networking brings.
A wireless LAN (WLAN) is a cellular computer network that transmits and receives
data with radio signals instead of wires. WLANs are used increasingly in both
home and office environments, and public areas such as airports, coffee shops and
universities. Innovative ways to utilize WLAN technology are helping people to work
and communicate more efficiently. Increased mobility and the absence of cabling
and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network.
Wireless adapter cards used on laptop and desktop systems support the same
protocols as Ethernet adapter cards.
Wireless Basics
People use wireless LAN technology for many different purposes:
Mobility
-
Productivity increases when people have access to data in any location
within the operating range of the WLAN.
Management decisions based on real-
time information can significantly improve worker efficiency.
Low Implementation Costs
WLANs are easy to set up, manage, change
and relocate. Networks that frequently change can benefit from WLANs ease of
implementation. WLANs can operate in locations where installation of wiring may
be impractical.
Installation and Network Expansion
- Installing a WLAN system can be fast and
easy and can eliminate the need to pull cable through walls and ceilings. Wireless
technology allows the network to go where wires cannot go - even outside the
home or office.
Scalability
– WLANs can be configured in a variety of topologies to meet the
needs of specific applications and installations. Configurations are easily changed
and range from peer-to-peer networks suitable for a small number of users to
larger infrastructure networks to accommodate hundreds or thousands of users,
depending on the number of wireless devices deployed.
Inexpensive Solution
- Wireless network devices are as competitively priced as
conventional Ethernet network devices.
Page 8 / 76
8
Standards-Based Technology
Based on the IEEE
802.11g
standard, the DP-G301 is
interoperable with existing
compatible 2.4GHz wireless technology with data transfer speeds of up to 54Mbps*
when used with other D-Link
Air
Plus G
devices.
Wireless Basics (continued)
Installation Considerations
The D-Link
Air
Plus
G
DP-G301 lets you print through your network, using a wireless
connection, from virtually anywhere within its operating range. Keep in mind,
however, that the number, thickness and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit the range. Typical ranges
vary depending on the types of materials and background RF (radio frequency)
noise in your home or business. The key to maximizing wireless range is to follow
these basic guidelines:
Keep the number of walls and ceilings between the DP-G301 and other
network devices
to a minimum - each wall or ceiling can reduce your D-Link
wireless product’s range from 3-90 feet (1-30 meters.) Position your
devices
so that the number of walls or ceilings is minimized.
2.
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick.
At a 2-degree angle it looks over 42 feet (14 meters).
Position devices so that
the signal will travel straight through a wall or ceiling (instead of at an angle) for
better reception.
3.
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate extreme RF noise.
5.
Building materials can impede the wireless signal - a solid metal door or
aluminum studs may have a negative effect on range. Try to position wireless
devices and computers with wireless adapters so that the signal passes
through drywall or open doorways and not other materials.
4.
Keep the antenna of the DP-G301 in an upright position.
1.
* Maximum wireless signal rate based on IEEE Standard 802.11g specifications.
Actual data
throughput will vary.
Network conditions and environmental factors, including volume of network
traffic, building materials and construction, and network overhead lower actual data throughput
rate.
Page 9 / 76
9
Setting up the DP-G301
Installing the Print Server
WARNING:
Configuration problems may result if the Print Server is powered up without
first establishing its network connection. Follow this procedure to avoid complications at
the configuration stage.
Confirm proper operation of your printer before connecting the DP-G301.
1.
When you have confirmed proper operation of your printer, turn your
printer power
OFF
.
2.
Confirm that your network is operating normally.
3.
Connect the DP-G301 to your network, using a straight-through CAT5 cable.
4.
While the printer is powered
OFF
, install the DP-G301 parallel port connector
into the parallel port on the network printer.
5.
Switch
ON
your connected printer.
6.
Plug the DC power adapter into the DC 5V power socket on the rear panel of
the Print Server.
7.
Plug the power adapter into a power outlet. This will supply power to the DP-
G310, as it has no external power switch. The green Power LED on the
Print
Server’s front panel should illuminate steadily, and the Print Server’s
Self-
Test will proceed.
8.
Page 10 / 76
10
Immediately after power-up,
three of the green LEDs should illuminate steadily for
several seconds. Irregularity of
the LED during this LED test may mean there is a
problem with the LED itself.
The actual component tests immediately follow the LED tests. A normal (no fault)
result is signaled by a flashing of the LPT LED, followed by a darkened LED.
If the Self-Test routine detects any component error, then following the LED tests
the Self-Test will halt and the LEDs will continuously signal the error according to
the following table.
When the DP-G301 is powered
, it also automatically performs a Self-Test on
each of its major components. The final result of the Self-Test is signaled by the
state of the LPT LED indicator following the Self-Test. Preliminary to the actual
component tests, the LED indicators are tested to confirm their steady and flashing
operation.
Power ON Self-Test
LPT LED
Faulty Component
Low speed flashing
Need to reload firmware
Steady ON
SDRAM error
1 long 2 short
1 long 3 short
1 long 5 short
1 long 6 short
1 long 8 short
1 long 9 short
LPT error
Parallel IC setup error
CPU’s MAC Controller error
Flash Erase/Program error
Flash Protected
CPU’s timer error
1 long 19 short
1 long 14 short
1 long 15 short
1 long 17short
LAN PHY or MII interface error
Wireless Card init error
Wireless Card config error
CPU’s PCI Bridge error
Every DP-G301 has been factory-tested to operate properly.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top