1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-862L
    5. /
  5. 21
Page 101 / 151 Scroll up to view Page 96 - 100
97
D-Link DIR-862L User Manual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP
™
) feature click on
Enabled
. UPnP provides compatibility with networking
equipment, software and peripherals.
Checking the box will allow the DIR-862L to respond
to pings. Unchecking the box may provide some extra
security from hackers.
You may set the port speed of the Internet port to 10 Mbps,
100 Mbps, or Auto (recommended).
Check the box to allow multicast traffic to pass through
the router from the Internet (IPv4).
Check the box to allow multicast traffic to pass through
the router from the Internet (IPv6).
Enable UPnP:
WAN Ping:
WAN Port Speed:
Enable Multicast
Streams:
Enable IPV6
Multicast Streams:
Advanced Network Settings
DIR-862L
Page 102 / 151
98
D-Link DIR-862L User Manual
Section 3 - Configuration
Guest Zone
Check to enable the Guest Zone feature.
The schedule of time when the Guest Zone will be
active. The schedule may be set to
Always
, which will
allow the particular service to always be enabled. You
can create your own times in the
Tools
>
Schedules
section or click
Add New
.
Enter a wireless network name (SSID) that is different
from your main wireless network.
Check to allow network connectivity between the
different zones created.
Select the type of security or encryption you would
like to enable for the guest zone.
Enable Guest
Zone:
Schedule:
Wireless
Network Name:
Enable Routing
Between Zones:
Security Mode:
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones
will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands.
DIR-862L
Page 103 / 151
99
D-Link DIR-862L User Manual
Section 3 - Configuration
IPv6 Firewall
The DIR-862L’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
The DIR-862L’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Check the box to enable the IPv6 firewall simple security.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 firewall rule.
Use the drop-down menu to select the time schedule that
the IPv6 Firewall Rule will be enabled on. The schedule may
be set to
Always
, which will allow the particular service to
always be enabled. You can create your own times in the
Tools
>
Schedules
section.
Use the
Source
drop-down menu to specify the interface that
connects to the source IPv6 addresses of the firewall rule.
Enter the source IPv6 address range in the adjacent
IP
Address Range
field.
Use the
Interface
drop-down menu to specify the interface
that connects to the destination IP addresses of the firewall
rule.
Select the protocol of the firewall port (
All
,
TCP
,
UDP
, or
ICMP
).
Enter the first port of the range that will be used for the
firewall rule in the first box and enter the last port in the
field in the second box.
Enable Checkbox:
Configure IPv6
Firewall:
Name:
Schedule:
Source:
IP Address Range:
Interface:
Protocol:
Port Range:
DIR-862L
Page 104 / 151
100
D-Link DIR-862L User Manual
Section 3 - Configuration
IPv6 Routing
Check the box next to the route you wish to enable.
Enter a specific name to identify this route.
This is the IP address of the router used to reach
the specified destination or enter the IPv6 address
prefix length of the packets that will take this route.
Enter the metric value for this rule here.
Use the drop-down menu to specify if the IP packet
must use the WAN or LAN interface to transit out of
the Router.
Enter the next hop that will be taken if this route
is used.
Route List:
Name:
Destination IP/
Prefix Length:
Metric:
Interface:
Gateway:
This page allows you to specify custom routes that determine how data is moved around your network.
DIR-862L
Page 105 / 151
101
D-Link DIR-862L User Manual
Section 3 - Configuration
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Tools
Enter a new password for the Administrator Login Name. The administrator can
make changes to the settings.
Enter the new password for the User login. If you login as the User, you cannot
change the settings (you can only view them).
Enter a name for your router.
Enables a challenge-response test to require users to type letters or numbers
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely. This means to connect
to the router, you must enter
(for example) instead of
.
Remote management allows the DIR-862L to be configured from the Internet
by a web browser. A username/password is still required to access the Web
Management interface.
The port number used to access the DIR-862L is used in the URL. Example:
whereas x.x.x.x is the Internet IP address of the DIR-862L and
8080 is the port used for the Web Management interface.
If you have enabled
HTTPS Server,
you must enter
https://
as part of the URL to
access the router remotely.
This section will list any rules that are created. You may click the
Edit
icon to
change the settings or enable/disable the rule, or click the
Delete
icon to remove
the rule.
Details
will display the current status.
Admin Password:
User Password:
Gateway name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
DIR-862L

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top