Page 91 / 151
Scroll up to view Page 86 - 90
87
D-Link DIR-862L User Manual
Section 3 - Configuration
Network Filter
Select
Turn MAC Filtering Off
,
Allow MAC addresses
listed below
, or
Deny MAC addresses listed below
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the
Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and
click
<<
to copy that MAC Address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Page 92 / 151
88
D-Link DIR-862L User Manual
Section 3 - Configuration
Access Control
Click the
Add Policy
button to start the Access
Control Wizard.
Add Policy:
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Click
Next
to continue with the wizard.
Access Control Wizard
DIR-862L
Page 93 / 151
89
D-Link DIR-862L User Manual
Section 3 - Configuration
Enter a name for the policy and then click
Next
to continue.
Select a schedule (e.g.
Always
) from the drop-down menu and
then click
Next
to continue.
Enter the following information and then click
Next
to continue.
•
Address Type
- Select IP address, MAC address, or Other
Machines.
•
IP Address
- Enter the IP address of the computer you want to
apply the rule to.
•
Machine Address
- Enter the PC MAC address (i.e. 00:00.00.00.00).
Select the filtering method and then click
Next
to continue.
Page 94 / 151
90
D-Link DIR-862L User Manual
Section 3 - Configuration
Enter the rule:
Enable
- Check to enable the rule.
Name
- Enter a name for your rule.
Dest IP Start
- Enter the starting IP address.
Dest IP End
- Enter the ending IP address.
Protocol
- Select the protocol.
Dest Port Start
- Enter the starting port number.
Dest Port End
- Enter the ending port number.
To enable web logging, click
Enable
.
Click
Save
to save the access control rule.
Your newly created policy will now show up under
Policy Table
.
Page 95 / 151
91
D-Link DIR-862L User Manual
Section 3 - Configuration
Add Website
Filtering Rule:
Website URL/
Domain:
Website Filters
Select either
DENY computers access to ONLY
these sites
or
ALLOW computers access to ONLY
these sites
.
Enter the keywords or URLs that you want to allow
or block. Click
Save Settings
.
Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
To use this feature select to
Allow
or
Deny
, enter the domain or website and click
Save Settings
. You must also select
Apply
Web Filter
under the
Access Control
section.
19216811.live