Page 101 / 139
Scroll up to view Page 96 - 100
96
D-Link DIR-835 User Manual
Section 4 - Security
From the
Setup
>
Wireless.Settings
screen, click
Add.Wireless.
Device.with.WPS
.
Add Wireless Device with WPS Wizard
PIN:
Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and click
Connect
.
PBC:.
Select this option to use PBC (Push Button) method to add a
wireless client. Click
Connect
.
Select
Auto
to add a wireless client using WPS (Wi-Fi Protected
Setup). Once you select
Auto.
and click
.Connect
, you will have a
120 second time limit to apply the settings to your wireless client(s)
and successfully establish a connection.
If you select
Manual
, a settings summary screen will appear. Write
down the security key and enter this on your wireless clients.
Page 102 / 139
97
D-Link DIR-835 User Manual
Section 4 - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1).
Click on
.Setup.
and
then click
.Wireless.Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Personal
.
3. Next to
WPA Mode
, select
Auto
,
WPA2.Only
, or
.WPA.Only
. Use
Auto
if you have wireless clients using both WPA and WPA2.
4. Next to
Cypher Type
, select
TKIP.and.AES
,
TKIP
, or
AES
.
5. Next to
Group Key Update Interval
, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
6. Next to
Pre-Shared Key
, enter a key (passphrase). The key is entered as
a pass-phrase in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.
7. Click
Save.Settings
to save your settings. If you are configuring the
router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same
passphrase as you did on the router.
Page 103 / 139
98
D-Link DIR-835 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1).
Click on
.
Setup.
and then click
.Wireless.Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Enterprise
.
3. Next to
WPA Mode
, select
Auto
,
WPA2.Only
, or
.WPA.Only
. Use
Auto
if you have wireless clients using both WPA and WPA2.
4. Next to
Cypher Type
, select
TKIP.and.AES
,
TKIP
, or
AES
.
5. Next to
Group Key Update Interval
, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
6. Next to
Authentication Timeout
, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
7. Next to
RADIUS Server IP Address
enter the IP Address of your RADIUS server.
Configure WPA-Enterprise (RADIUS)
Page 104 / 139
99
D-Link DIR-835 User Manual
Section 4 - Security
8.
Next to
RADIUS Server Port
, enter the port you are using with
your RADIUS server. 1812 is the default port.
9.
Next to
RADIUS Server Shared Secret
, enter the security key.
10. If the
MAC Address Authentication
box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
11. Click
Advanced
to enter settings for a secondary RADIUS
Server.
12. Click
Apply.Settings
to save your settings.
Page 105 / 139
100
D-Link DIR-835 User Manual
Section 4 - Security
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Connect to a Wireless Network
Wireless Icon
19216811.live