Page 91 / 139
Scroll up to view Page 86 - 90
86
D-Link DIR-835 User Manual
Section 3 - Configuration
Statistics
The screen below displays the
Traffic.Statistics
. Here you can view the amount of packets that pass through the DIR-835 on both
the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the
device is rebooted.
Page 92 / 139
87
D-Link DIR-835 User Manual
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation
between a program or application on a LAN-side computer and a program or application on a WAN-side computer.
Page 93 / 139
88
D-Link DIR-835 User Manual
Section 3 - Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Use the drop-down menu to specify if the IP packet must
use the
WAN
or
LAN
interface to transit out of the Router.
Enter the IP address of the packets that will take this route.
Enter the subnet mask to specify the subnet of the IP
packets that will take this route.
Enter the next hop that will be taken if this route is used.
Interface:
Destination IP:
Subnet Mask:
Gateway:
Click the
Save Settings
button to save any changes made.
Page 94 / 139
89
D-Link DIR-835 User Manual
Section 3 - Configuration
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and
MAC address of the connected wireless clients.
Wireless
Page 95 / 139
90
D-Link DIR-835 User Manual
Section 3 - Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.