D-Link DIR-835 Router Manual PDF (Setup & Configuration Guide)

Page 76 / 139 Scroll up to view Page 71 - 75

71

D-Link DIR-835 User Manual

Section 3 - Conﬁguration

Guest Zone

Check to enable the Guest Zone feature.

The schedule of time when the Guest Zone will be

active. The schedule may be set to Always, which will

allow the particular service to always be enabled. You

can create your own times in the

Tools

>

Schedules

section.

Enter a wireless network name (SSID) that is diﬀerent

from your main wireless network.

Check to allow network connectivity between the

diﬀerent zones created.

Select the type of security or encryption you would

like to enable for the guest zone.

Enable Guest

Zone:

Schedule:

Wireless

Network Name:

Enable Routing

Between Zones:

Security Mode:

The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These

zones will be separate from your main wireless network. You may conﬁgure diﬀerent zones for the 2.4GHz and 5.0GHz wireless

bands.

Page 77 / 139

72

D-Link DIR-835 User Manual

Section 3 - Conﬁguration

IPv6 Firewall

The DIR-835’s IPv6 Firewall feature allows you to conﬁgure which kind of IPv6 traﬃc is allowed to pass through the device. The

DIR-835’s IPv6 Firewall functions in a similar way to the IP Filters feature.

Check the box to enable the IPv6 ﬁrewall simple security.

Enter a name to identify the IPv6 ﬁrewall rule.

Use the radio buttons to

Allow

or

Deny

transport of the

IPv6 data packets according to the criteria deﬁned in the

ﬁrewall rule.

Use the

Source

drop-down menu to specify the interface

that connects to the source IPv6 addresses of the ﬁrewall

rule.

Enter the source IPv6 address range in the adjacent

IP

Address Range

ﬁeld.

Use the

Dest

drop-down menu to specify the interface that

connects to the destination IP addresses of the ﬁrewall rule.

Enable Checkbox:

Name:

Action:

Source:

IP Address Range:

Dest:

Use the drop-down menu to select the time schedule that

the IPv6 Firewall Rule will be enabled on. The schedule may

be set to Always, which will allow the particular service to

always be enabled. You can create your own times in the

Tools

>

Schedules

section.

Select the protocol of the ﬁrewall port (All, TCP, UDP, or ICMP).

Enter the ﬁrst port of the range that will be used for the ﬁrewall rule in the top port range ﬁeld and enter the last port in the ﬁeld

underneath.

Select Schedule:

Protocol:

Port Range:

Click the

Save Settings

button to save any changes made.

Page 78 / 139

73

D-Link DIR-835 User Manual

Section 3 - Conﬁguration

IPv6 Routing

Check the box next to the route you wish to enable.

Enter a speciﬁc name to identify this route.

Enter the host or network address you wish to reach.

This is the IP address of the router used to reach the

speciﬁed destination.

Route List:

Name:

Destination IP:

Gateway IP:

This page allows you to specify custom routes that determine how data is moved around your network.

Page 79 / 139

74

D-Link DIR-835 User Manual

Section 3 - Conﬁguration

Admin

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are

two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin

has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the

admin account has the ability to change both admin and user account passwords.

Tools

Enter a new password for the Administrator Login Name. The administrator

can make changes to the settings.

Enter the new password for the User login. If you login as the User, you

cannot change the settings (you can only view them).

Enter a name for the DIR-835 router.

Enter a name for the router.

Enables a challenge-response test to require users to type letters or

numbers from a distorted image displayed on the screen to prevent online

hackers and unauthorized users from gaining access to your router’s

network settings.

Check to enable HTTPS to connect to the router securely.

Remote management allows the DIR-835 to be conﬁgured from the

Internet by a web browser. A username and password is still required to

access the Web-Management interface. In general, only a member of your

network can browse the built-in web pages to perform Administrator

tasks. This feature enables you to perform Administrator tasks from the

remote (Internet) host. The port number used to access the DIR-835.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of

the DIR-835 and 8080 is the port used for the Web Management interface.

If you have enabled

HTTPS.Server

and checked

Use.HTTPS

, you must

enter

https://

as part of the URL to access the router remotely.

This section will list any rules that are created. You may click the

Edit

icon to change the settings or enable/disable the rule, or click the

Delete

icon to

remove the rule.

Admin Password:

User Password:

Gateway Name:

Enable Graphical

Authentication:

Enable HTTPS

Server:

Enable Remote

Management:

Remote Admin

Inbound Filter:

Details:

Page 80 / 139

75

D-Link DIR-835 User Manual

Section 3 - Conﬁguration

Time

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. Check this box to use a NTP server.

This will only connect to a server on the Internet,

not a local server.

Enter the NTP server or select one from the drop-

down menu.

To manually input the time, enter the values

in these ﬁelds for the Year, Month, Day, Hour,

Minute, and Second and then click

Set.Time

.

You can also click

Copy.Your.Computer’s.Time.

Settings

.

Time Zone:

Daylight

Saving:

Enable NTP

Server:

NTP Server

Used:

Manual:

The Time Conﬁguration option allows you to conﬁgure, update, and maintain the correct time on the internal system clock.

From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be conﬁgured to

automatically adjust the time when needed.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share