Page 61 / 139
Scroll up to view Page 56 - 60
56
D-Link DIR-835 User Manual
Section 3 - Configuration
This option is enabled by default. This will allow your router to automatically determine the network priority of running
programs.
This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority network
packets can have on more urgent ones.
Enable QoS
Engine:
Automatic
Classification:
Page 62 / 139
57
D-Link DIR-835 User Manual
Section 3 - Configuration
Network Filters
Select
.Turn. MAC. Filtering. Off
,
Allow. MAC.
addresses.listed.below
, or
Deny.MAC.addresses.
listed.below
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the
Networking Basics
section in this
manual.
Select a DHCP client from the drop-down menu
and click
<<
to copy that MAC Address.
Click to remove the MAC address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Clear:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Page 63 / 139
58
D-Link DIR-835 User Manual
Section 3 - Configuration
Access Control
Click the
Add.Policy
button to start the Access
Control Wizard.
Add Policy:
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Click
Next
to continue with the wizard.
Access Control Wizard
Page 64 / 139
59
D-Link DIR-835 User Manual
Section 3 - Configuration
Enter a name for the policy and then click
Next
to continue.
Select a schedule (I.E. Always) from the drop-down menu and
then click
Next
to continue.
Enter the following information and then click
Next
to continue.
•
Address.Type
- Select IP address, MAC address, or Other
Machines.
•
IP.Address
- Enter the IP address of the computer you want to
apply the rule to.
•
Machine.Address
- Enter the PC MAC address (i.e. 00:00.00.00.00).
Select the filtering method and then click
Next
to continue.
Page 65 / 139
60
D-Link DIR-835 User Manual
Section 3 - Configuration
Enter the rule:
Enable
- Check to enable the rule.
Name
- Enter a name for your rule.
Dest.IP.Start
- Enter the starting IP address.
Dest.IP.End
- Enter the ending IP address.
Protocol
- Select the protocol.
Dest.Port.Start
- Enter the starting port number.
Dest.Port.End
- Enter the ending port number.
To enable web logging, click
Enable
.
Click
Save
to save the access control rule.
Your newly created policy will now show up under
Policy.Table
.
19216811.live