1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-815
    5. /
  5. 9
Page 41 / 136 Scroll up to view Page 36 - 40
36
D-Link DIR-815 User Manual
Section 3 - Configuration
Maximum Idle
Time:
DNS Servers:
MTU:
MAC Address:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1454 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP.
You can use the
Clone Your PC’s MAC Address
button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Click the
Save Settings
button to save any changes made.
Page 42 / 136
37
D-Link DIR-815 User Manual
Section 3 - Configuration
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS Server Addresses
(Static PPTP only).
Enter the Gateway IP Address provided by your ISP.
Enter the Server IP provided by your ISP (optional).
Enter your PPTP username.
Enter your PPTP password and then retype the password
in the next box.
Use the radio buttons to specify the reconnect mode.
The
user can specify a custom schedule or specify the
On
Demand
, or
Manual
option.
To specify a custom schedule, use the drop-down menu to
select one of the schedules that has been defined in the
Tools
>
Schedules
window. To create a new schedule, click
the
New Schedule
button to open the
Tools> Schedules
window. Refer to “Schedules” on page 83 for more information.
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway:
PPTP Server IP:
Manual Internet Connection Setup
Russia PPTP (Dual Access)
Username:
Password:
Reconnect
Mode:
Select
PPTP (Point-to-Point Tunneling Protocol)
from the drop-down menu if your ISP uses a PPTP connection. Your ISP will
provide you with a username and password. This option is typically used for DSL services.
Page 43 / 136
38
D-Link DIR-815 User Manual
Section 3 - Configuration
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
The DNS server information will be supplied by your ISP (Internet Service Provider).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1454 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP.
You can use the
Clone Your PC’s MAC Address
button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Maximum Idle
Time:
DNS Servers:
MTU:
MAC Address:
Click the
Save Settings
button to save any changes made.
Page 44 / 136
39
D-Link DIR-815 User Manual
Section 3 - Configuration
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the
next box.
Enter the ISP Service Name (optional).
Use the radio buttons to specify the reconnect mode. The
user can
specify a custom schedule or specify the
On Demand
, or
Manual
option.
To specify a custom schedule, use the drop-down menu to select
one of the schedules that has been defined in the
Tools
>
Schedules
window. To create a new schedule, click the
New Schedule
button
to open the
Tools> Schedules
window. Refer to “Schedules” on
page 83 for more information.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static
PPPoE only).
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect
Mode:
Manual Internet Connection Setup
Russia PPPoE (Dual Access)
Select
PPPoE (Username/Password)
from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide you
with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from
your computer. The software is no longer needed and will not work through a router.
Maximum Idle
Time:
DNS Addresses:
Page 45 / 136
40
D-Link DIR-815 User Manual
Section 3 - Configuration
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1454 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP.
You can use the
Clone Your PC’s MAC Address
button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
If your ISP requires you to manually specify the WAN Physical IP settings, click the
Static IP
radio button and enter the required
IP
Address, Subnet Mask, Gateway,
and
DNS Server Addresses
in their respective fields.
MTU:
MAC Address:
WAN Physical
Settings:
Click the
Save Settings
button to save any changes made.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top