Page 26 / 136 Scroll up to view Page 21 - 25
21
D-Link DIR-815 User Manual
Section 3 - Configuration
Internet Connection Setup Wizard
Click the
Internet Connection Setup Wizard
button to start the
Internet Connection Setup Wizard.
Page 27 / 136
22
D-Link DIR-815 User Manual
Section 3 - Configuration
Create a new password and then click
Next
to continue.
The following window appears, summarizing the steps required
to complete the Internet Connection Setup Wizard:
Click
Next
to continue.
Select your time zone from the drop-down menu and then click
Next
to continue.
Page 28 / 136
23
D-Link DIR-815 User Manual
Section 3 - Configuration
Select the type of Internet connection you use and then click
Next
to continue.
If you selected
DHCP Connection (Dynamic IP Address)
, you
may need to enter the MAC address of the computer that was
last connected directly to your modem. If you are currently
using that computer, click
Clone Your PC’s MAC Address
and
then click
Next
to continue.
The Host Name is optional but may be required by some ISPs.
The default host name is the device name of the router and may
be changed.
Page 29 / 136
24
D-Link DIR-815 User Manual
Section 3 - Configuration
If you selected
PPPoE
, enter your PPPoE username and password.
If your ISP requires you to enter a PPPoE service name, enter the
service name in the
Service Name
field.
Select
Static
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses.
Click
Next
to continue.
Note:
Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work
through a router.
If you selected
PPTP
, enter your PPTP username and password.
Select
Static
if your ISP assigned you the IP address, subnet
mask, gateway, and PPTP server addresses.
Click
Next
to continue.
Page 30 / 136
25
D-Link DIR-815 User Manual
Section 3 - Configuration
If you selected
L2TP
, enter your L2TP username and password.
Select
Static
if your ISP assigned you the IP address, subnet
mask, gateway, and L2TP server addresses.
Click
Next
to continue.
If you selected
Static
, enter your network settings supplied by
your Internet provider.
Click
Next
to continue.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top