1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-803
    5. /
  5. 16
Page 76 / 139 Scroll up to view Page 71 - 75
72
D-Link DIR-803 User Manual
Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and
application priority is not classified automatically. The QoS section contains a queuing mechanism, traffic shaping and classification. It supports two kinds of
queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ).
SPQ will process traffic based on traffic priority. Queue1 has the highest priority and
Queue4 has the lowest priority. WFQ will process traffic based on the queue weight.
Users can configure each queue’s weight. The sum of all the queue’s weight must
be 100. When surfing the Internet, the system will do traffic shaping based on the
uplink and downlink speed. The classification rules can be used to classify traffic to
different queues, then SPQ or WFQ will do QoS based on the queue’s priority
or weight.
The following parameters will be available for configuration:
Enable QoS:
This option is disabled by default. Enable this option for
better performance and experience with online games and
other interactive applications, such as VoIP.
Uplink Speed:
The speed at which data can be transferred from the
router to your ISP. This is determined by your ISP. ISP’s often
define speed as a download/upload pair. For example,
1.5Mbits/284Kbits. Using this example, you would enter
284. Alternatively you can test your uplink speed with a
service such as www.dslreports.com.
Downlink Speed:
The speed at which data can be transferred from the ISP
to the router. This is determined by your ISP. ISP’s often
define speed as a download/upload pair. For example,
1.5Mbits/284Kbits.
Using this example, you would enter 1500. Alternatively
you can test your downlink speed with a service such as
www.dslreports.com.
Queue Type:
Here the user can specify the queue type used. When choosing the option Strict Priority Queue, the router will apply QoS based on the
internal specification for the queue ID’s listed. When choosing the option Weight Fair Queue, the router will apply QoS based on the user
defined percentage in the Queue Weight column.
Queue ID:
In this column the Queue ID used will be displayed.
Page 77 / 139
73
D-Link DIR-803 User Manual
Section 3 - Configuration
The following parameters will be available for configuration:
Checkbox:
Tick this option to enable the rule specified.
Name:
Enter a custom name for the rule being created here.
This name is used for identification.
Queue ID:
Select the appropriate priority requirement from the
drop-down menu that will be applied to this rule. Op-
tion to choose from are Highest, Higher, Normal, and
Best Effort.
Protocol:
Select the protocol used for the application for in the
drop-down menu and it will automatically place it in
the Protocol field.
Local IP Range:
Enter the local IP range used here. This is the IP range
of you Local Area Network. The Router’s IP cannot be
included in this range.
Remote IP
Range:
Enter the remote IP range used here. This is the IP
range of the public network from the Internet Port
side. To apply this rule to any IP addresses from the
public side, enter the range 0.0.0.1 to 255.255.255.254.
Application
Port:
Enter the application port number used here.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
Queue Priority:
In this column the Queue Priority used will be displayed.
Queue Weight:
After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter
the Queue Weight for each individual Queue ID.
Page 78 / 139
74
D-Link DIR-803 User Manual
Section 3 - Configuration
Network Filters
Select
.Turn.MAC.Filtering.Off
,
Allow.MAC.addresses.
listed.below
, or
Deny.MAC.addresses.listed.below
from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the
Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and
click
<<
to copy that MAC Address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Page 79 / 139
75
D-Link DIR-803 User Manual
Section 3 - Configuration
Access Control
Click the
Add.Policy
button to start the Access
Control Wizard.
Add Policy:
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Click
Next
to continue with the wizard.
Access Control Wizard
DIR-803
Page 80 / 139
76
D-Link DIR-803 User Manual
Section 3 - Configuration
Enter a name for the policy and then click
Next
to continue.
Select a schedule (I.E. Always) from the drop-down menu and
then click
Next
to continue.
Enter the following information and then click
Next
to continue.
•
Address.Type
- Select IP address, MAC address, or Other
Machines.
•
IP.Address
- Enter the IP address of the computer you want to
apply the rule to.
•
Machine.Address
- Enter the PC MAC address (i.e. 00:00.00.00.00).
Select the filtering method and then click
Next
to continue.

Rate

4.7 / 5 based on 3 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top