D-Link DIR-803 Router Manual PDF (Setup & Configuration Guide)

Page 96 / 139 Scroll up to view Page 91 - 95

92

D-Link DIR-803 User Manual

Section 3 - Conﬁguration

Use this option to save the current router

conﬁguration settings to a ﬁle on the hard disk of

the computer you are using. First, click the

Save

button. A ﬁle dialog will appear, allowing you to

select a location and ﬁle name for the settings.

Use this option to load previously saved router

conﬁguration settings. First, use the

Browse

option

to find a previously saved file of configuration

settings. Then, click the

Load

button to transfer

those settings to the router.

This option will restore all conﬁguration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router conﬁguration

settings, use the

Save

button above.

Click to reboot the router.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to

Factory Default

Settings:

Reboot Device:

System

This section allows you to manage the router’s conﬁguration settings, reboot the router, and restore the router to the factory

default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.

DIR-803

Page 97 / 139

93

D-Link DIR-803 User Manual

Section 3 - Conﬁguration

Firmware

Browse:

Upload:

After you have downloaded the new ﬁrmware, click

Browse

to locate the ﬁrmware update on your hard

drive. Click

Upload

to complete the ﬁrmware upgrade.

Once you have a ﬁrmware update on your computer,

use this option to browse for the ﬁle and then upload

the information into the access point.

You can upgrade the ﬁrmware of the access point here. Make sure the ﬁrmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the ﬁrmware ﬁle to be used for the update. Please check the D-Link support website

for ﬁrmware updates at

http://support±dlink±com

. You can download ﬁrmware upgrades to your hard drive from this site.

After you have downloaded the new language pack,

click

Browse

to locate the language pack ﬁle on your

hard drive. Click

Upload

to complete the language

pack upgrade.

Language Pack

You can change the language of the web UI by uploading

available language packs.

Browse:

DIR-803

Page 98 / 139

94

D-Link DIR-803 User Manual

Section 3 - Conﬁguration

Dynamic Domain Name System is a method of

keeping a domain name linked to a changing IP

Address. Check the box to enable DDNS.

Select your DDNS provider from the drop-down

menu or enter the DDNS server address.

Enter the Host Name that you registered with

your DDNS service provider.

Enter the Username or key for your DDNS

account.

Enter the Password or key for your DDNS account.

Enter a timeout time (in hours).

Displays the current connection status.

Enable

Dynamic DNS:

Server

Address:

Host Name:

Username or

Key:

Password or

Key:

Timeout:

Status:

Dynamic DNS

The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased

(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign

dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to

your server no matter what your IP address is.

DIR-803

Page 99 / 139

95

D-Link DIR-803 User Manual

Section 3 - Conﬁguration

The Ping Test is used to send Ping packets to test if a

computer is on the Internet. Enter the IP address that you

wish to Ping and click

Ping

.

Enter the IPv6 address that you wish to Ping and click

Ping

.

The results of your ping attempts will be displayed here.

System Check

Ping Test:

IPv6 Ping Test:

Ping Results:

DIR-803

Page 100 / 139

96

D-Link DIR-803 User Manual

Section 3 - Conﬁguration

Enter a name for your new schedule.

Select a day, a range of days, or All Week to include

every day.

Check

All.Day.-.24hrs

or enter a start and end

time for your schedule.

You must click

Save.Settings

at the top for your

schedules to go into eﬀect.

The list of schedules will be listed here. Click the

Edit

icon to make changes or click the

Delete

icon

to remove the schedule.

Name:

Days:

Time:

Save:

Schedule Rules

List:

Schedules

Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to

8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.

DIR-803

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share