Page 31 / 149
Scroll up to view Page 26 - 30
26
D-Link DIR-685 User Manual
Section 7 - LCD Screen Options
Router Settings
LCD Saving Settings
The
Adjust Display Sleep Time
screen will appear. Use the left and right arrow buttons to select the amount of inactive time before the
LCD display goes to sleep.
To save your settings, press the up arrow. You will be prompted to select
Yes
or
No
. Press the left button to select
Yes
and press the
center button.
Clock Display Setting
Select
Yes
if you want the clock displayed on the LCD screen when asleep. Select
No
to have the LCD screen off when asleep.
Page 32 / 149
27
D-Link DIR-685 User Manual
Section 7 - LCD Screen Options
LCD Luminance Settings
The
LCD Luminance Settings
screen will allow you to adjust the brightness of the LCD screen.
Press the left arrow to make the LCD screen darker or press the right arrow to make it brighter.
To save your settings, press the up arrow. You will be prompted to select
Yes
or
No
. Press the left button to select
Yes
and press the
center button.
Page 33 / 149
28
D-Link DIR-685 User Manual
Section 7 - LCD Screen Options
Hard Disk Saving Settings
The
Hard Disk Saving Settings
screen will allow you to set the duration of inactivity before the hard drive goes to sleep.
To save your settings, press the up arrow. You will be prompted to select
Yes
or
No
. Press the left button to select
Yes
and press the
center button.
Page 34 / 149
29
D-Link DIR-685 User Manual
Section 7 - LCD Screen Options
Photos
Select the hard drive or removable storage device that contains the images you want to display on the LCD screen and press the center
button. Select the folder or subfolder that you would like to display and press the center button.
Thumbnails of the available images will appear. Select an image and press
the center button. This will start the slideshow and display all
images in the selected folder.
Page 35 / 149
30
D-Link DIR-685 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
Log into the Router as follows:
Select
•
Admin
from the drop-down menu and
then enter your password. Leave the password
blank by default.
Type the characters that appear in the picture
•
at the bottom of the window into the field above
the picture and click the
Log In
button to log
into the Router. Click the
Regenerate
button if
you would like to generate a new code.
If you get a
•
Page Cannot be Displayed
error,
please refer to the
Troubleshooting
section
for assistance.
19216811.live