9
D-Link DIR-685 User Manual
Section 1 - Product Overview
The following screens can be viewed on the LCD Screen using the Touch Pad buttons:
Time / Date
y
- The router displays the date and time when the device has been left idle for the amount of time
specified in the
Setup > LCD Setup
configuration screen.
Router Statistics
y
- The Router Statistics screen displays the send/receive rates of the different router
interfaces.
Status
y
- The following screens can be viewed after selecting the Status screen:
General Router Info
{
-
Displays the Model Name, Hardware Version, Firmware Version, and System Up
Time of the Router. The
New Firmware
field informs the user if there is a new firmware version available
from the D-Link website.
Internet Status
{
-
Displays the Internet Connection Type, Cable Status, Network Status, Connection Time,
MAC Address, IP Address, Subnet Mask, and Gateway of the Internet Connection.
Wired Status
{
-
Displays the MAC Address, IP Address, Subnet Mask, DHCP Server, and the status of
each Ethernet connection on the Router.
Wireless Status
{
-
Displays the Wireless Radio status, Wireless Channel, SSID of the Host network,
SSID of the Guest network, the enabled 802.11 modes, the Security mode enabled for the Host Zone,
the Security mode enabled for the Guest Zone, MAC Address of the Wireless Radio and the WPS PIN
number.
Hard Disk Status
{
- Displays information about the Hard Drive installed in the 2.5” Hard Drive bay including
the amount of available space, the make and model, disk format, total capacity, used disk space, available
disk space, disk health, and disk temperature.
WPS
y
- The WPS (Wi-Fi Protected Setup) screen allows you to add your router into an existing network via a
PIN number, or allows you to add a new wireless device to the router via Push Button Configuration (PBC). Use
the touch pad buttons to select the desired option.
19216811.live