31

D-Link DIR-685 User Manual

Section 3 - Configuration

Internet Connection Setup Wizard

You may click

Internet Connection Setup Wizard

to quickly configure your router. Refer to the next page for more

information.

If you would like to configure your settings without running the wizard, click

Manual Internet Connection Setup

and

skip to page 23.

32

D-Link DIR-685 User Manual

Section 3 - Configuration

Click

Next

to continue.

Create a new password and then click

Next

to continue.

Select your time zone from the drop-down menu and then click

Next

to continue.

Select the type of Internet connection you use and then click

Next

to continue.

33

D-Link DIR-685 User Manual

Section 3 - Configuration

If you selected

Dynamic

, you may need to enter the MAC address of

the computer that was last connected directly to your modem. If you are

currently using that computer, click

Clone MAC Address

and then click

Next

to continue.

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

If you selected

PPPoE

or

Russia PPPoE

, enter your PPPoE username

and password. Click

Next

to continue.

Select

Static

if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses.

Note:

Make sure to remove any PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected

PPTP

or

Russia PPTP

, enter your PPTP username and

password. Click

Next

to continue.

34

D-Link DIR-685 User Manual

Section 3 - Configuration

If you selected

L2TP

, enter your L2TP username and password. Click

Next

to continue.

If you selected

Static

, enter your network settings supplied by your Internet

provider. Click

Next

to continue.

Click

Connect

to save your settings. Once the router has finished rebooting, click

Continue

. Please allow 1-2 minutes

to connect.

Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect

to the Internet.

35

D-Link DIR-685 User Manual

Section 3 - Configuration

Tick the

Enable Access Point Mode

checkbox

if you want to disable NAT on the router and turn

it into an Access Point.

Use the

My Internet Connection is

drop-down

menu to select the mode that the router should

use to connect to the Internet.

Access Point

Mode:

Internet

Connection

Type:

Manual Internet Connection Setup