Page 16 / 126
Scroll up to view Page 11 - 15
11
D-Link DIR-657 User Manual
Section 2 - Installation
The DIR-657 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the
installation process.
Insert the
Quick.Router.Setup.Wizard.CD
in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps
and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to
Start
>
Run
. In the run box type “
D:\autorun±exe
” (where
D:
represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click
Install±
Getting Started
Note:
It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder.
Page 17 / 126
12
D-Link DIR-657 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as Internet
Explorer and enter the IP address of the router (192.168.0.1).
You may also connect using the NetBIOS name in the address bar
(
http://dlinkrouter
).
Select
Admin
from the drop-down menu and then enter your password.
The password is left blank by default.
If you get a
Page. Cannot. be. Displayed
error, please refer to the
Troubleshooting
section for assistance.
Page 18 / 126
13
D-Link DIR-657 User Manual
Section 3 - Configuration
Setup Wizard
Click
Internet.Connection.Setup.Wizard
to quickly configure your router. Skip to the
next page.
If you want to enter your settings without running the wizard, click
Manual.Configuration
and skip to page 15.
Click
Wireless.Connection.Setup.Wizard
to begin. Skip to page 81.
If you want to add your wireless clients to your router using WPS, click
Add.Wireless.
Device.with.WPS
and skip to page 74.
If you want to configure your wireless settings manually, click
Manual.Wireless.
Connection.Setup
and skip to page 21.
Internet Connection
Wireless Settings
Page 19 / 126
14
D-Link DIR-657 User Manual
Section 3 - Configuration
Click
Next
to continue.
Create a new password and then click
Next
to continue.
Select your time zone from the drop-down menu and then click
Next
to continue.
Select the type of Internet connection you use and then click
Next
to continue.
Page 20 / 126
15
D-Link DIR-657 User Manual
Section 3 - Configuration
If you selected Dynamic, you may need to enter the MAC address of the computer that was
last connected directly to your modem. If you are currently using that computer, click
Clone.
Your.PC’s.MAC.Address
and then click
Next
to continue.
The Host Name is optional but may be required by some ISPs. The default host name is the
device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next
to continue.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
Note:
Make sure to remove your PPPoE software from your computer. The software is no longer
needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next
to continue.
19216811.live