6

D-Link DIR-657 User Manual

Section 1 - Product Overview

Hardware Overview

Connections

1

LAN Ports (1-4)

Connect Ethernet devices such as computers, switches, and hubs.

2

Internet Port

The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable

or DSL modem.

3

USB

Connect a USB 1.1 or 2.0 flash drive to configure the wireless settings using WCN.

4

Reset

Press and hold the reset button to restore the router to its original factory settings.

5

Power Button

Press the power button to power on and off.

6

Power Receptor

Receptor for the supplied power adapter.

1

2

3

4

5

6

7

D-Link DIR-657 User Manual

Section 1 - Product Overview

Hardware Overview

Front View

1

WPS Button

Press this button to add your device to an existing network or to create a new network.

Power LED will blink on and off when WPS button is pressed.

2

SD Card Port

Insert your SD Card for sharing multimedia files such as video, music, and images. Refer to

the SharePort Plus manual for more information. You may access the files on the SD card

by opening a web browser and enter

\\dlinkrouter±

Power LED will be blinking blue when SD card is in use.

Please do not eject the SD card

until the Power LED is solid blue.

Removing SD card while Power LED is blinking will

cause adverse effect to your SD card.

1

2

8

D-Link DIR-657 User Manual

Section 1 - Product Overview

LEDs

1

Power LED

A solid light indicates a proper connection to the power supply.

2

Internet LED

A solid light indicates connection on the Internet port. This LED blinks during data

transmission. A solid blue light indicates that there is an Internet connection, an orange

light indicates that there is none.

1

2

9

D-Link DIR-657 User Manual

Section 2 - Installation

Before you Begin

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area

such as a closet, cabinet, or in the attic or garage.

Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet port on your

modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect

an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change

connection types (USB to Ethernet).

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300

from your computer or you will not be able to connect to the Internet.

10

D-Link DIR-657 User Manual

Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your

wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass

through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or

business. The key to maximizing wireless range is to follow these basic guidelines:

1.

Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling

can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is

minimized.

2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be

almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will

travel straight through a wall or ceiling (instead of at an angle) for better reception.

3.

Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position

access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects

such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your

wireless signal.

4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your

wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your

wireless devices as possible. The base transmits a signal even if the phone in not in use.