Page 36 / 126
Scroll up to view Page 31 - 35
31
D-Link DIR-657 User Manual
Section 3 - Configuration
Autoconfiguration (Stateful)
Select
Autoconfiguration.(Stateless/DHCPv6)
from
the drop-down menu.
Select either
Obtain.DNS.server.address.automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful.(DHCPv6)
.
Enter the start IPv6 Address for the DHCPv6 range for
your local computers.
Enter the end IPv6 Address for the DHCPv6 range for
your local computers.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
IPv6 Address Lifetime:
Page 37 / 126
32
D-Link DIR-657 User Manual
Section 3 - Configuration
Autoconfiguration (Stateless)
Select
Autoconfiguration.(Stateless/DHCPv6)
from
the drop-down menu.
Select either
Obtain.DNS.server.address.automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select either
SLAAC.+.RDNSS
or
SLAAC.+.Stateless.
DHCPv6
.
Enter the Router Advertisement Lifetime (in minutes).
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Autoconfiguration Type:
Router Advertisement
Lifetime:
Page 38 / 126
33
D-Link DIR-657 User Manual
Section 3 - Configuration
PPPoE (Stateful)
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet provider (ISP).
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, enable Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain. DNS. server. address. automatically
or
Use. the.
following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
My IPv6 Connection:
PPPoE:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Page 39 / 126
34
D-Link DIR-657 User Manual
Section 3 - Configuration
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
IPv6 Address Lifetime:
Select
Stateful.(DHCPv6)
.
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
Enter the end IPv6 Address for the DHCPv6 range for your local computers.
Enter the IPv6 Address Lifetime (in minutes).
Page 40 / 126
35
D-Link DIR-657 User Manual
Section 3 - Configuration
PPPoE (Stateless)
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet provider (ISP).
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, enable Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain. DNS. server. address. automatically
or
Use. the.
following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
My IPv6 Connection:
PPPoE:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
19216811.live