16

D-Link DIR-652 User Manual

Section 3 - Configuration

Web-based Configuration Utility

To access the configuration utility, open a web-browser such as Internet

Explorer and enter the IP address of the router (192.168.0.1).

You may also connect using the NetBIOS name in the address bar

(

http://dlinkrouter

).

Select

Admin

from the drop-down menu and then enter your password.

The password is left blank by default.

If you get a

Page. Cannot. be. Displayed

error, please refer to the

Troubleshooting

section for assistance.

17

D-Link DIR-652 User Manual

Section 3 - Configuration

Setup Wizard

Click

Internet.Connection.Setup.Wizard

to quickly configure your router. Skip to the

next page.

If you want to enter your settings without running the wizard, click

Manual.Configuration

and skip to page 21.

Click

Wireless.Connection.Setup.Wizard

to begin.

If you want to add your wireless clients to your router using WPS, click

Add.Wireless.

Device.with.WPS

and skip to page 88.

If you want to configure your wireless settings manually, click

Manual.Wireless.

Connection.Setup

and skip to page 28.

Internet Connection

Wireless Settings

18

D-Link DIR-652 User Manual

Section 3 - Configuration

Click

Next

to continue.

Create a new password and then click

Next

to continue.

Select your time zone from the drop-down menu and then click

Next

to continue.

Select the type of Internet connection you use and then click

Next

to continue.

19

D-Link DIR-652 User Manual

Section 3 - Configuration

If you selected Dynamic, you may need to enter the MAC address of the computer that was

last connected directly to your modem. If you are currently using that computer, click

Clone.

Your.PC’s.MAC.Address

and then click

Next

to continue.

The Host Name is optional but may be required by some ISPs. The default host name is the

device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Next

to continue.

Select

Static

if your ISP assigned you the IP address, subnet mask, gateway, and DNS server

addresses.

Note:

Make sure to remove your PPPoE software from your computer. The software is no longer

needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click

Next

to continue.

20

D-Link DIR-652 User Manual

Section 3 - Configuration

If you selected L2TP, enter your L2TP username and password. Click

Next

to continue.

If you selected Static, enter your network settings supplied by your Internet provider. Click

Next

to continue.

Click

Connect

to save your settings. Once the router is finished rebooting, click

Continue

.

Please allow 1-2 minutes to connect.

Close your browser window and reopen it to test your Internet connection. It may take a few

tries to initially connect to the Internet.