1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-632
    5. /
  5. 25
Page 121 / 197 Scroll up to view Page 116 - 120
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
Vendor ID
The identifier of your ISP.
Optional
.
Authorization via 802.1x protocol
Authorization in the
ISP's network via
802.1x protocol
Select the checkbox to allow authorization in the ISP's network via
the 802.1x protocol.
Authentication method
Select a needed authentication method from the drop-down list.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Figure 98. The page for creating a new connection. The
Miscellaneous
section.
Parameter
Description
Miscellaneous
Enable RIP
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page
121
of 197
Page 122 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 99. The page for creating a new connection. The
VPN
section.
Parameter
Description
VPN
Connect automatically
Select the checkbox to enable auto-start of the connection upon the
boot-up of the router.
Username
A username (login) to access the Internet.
Without authorization
Select the checkbox if you don't need to enter a username and
password to access the Internet.
Password
A password to access the Internet.
Password confirmation
The confirmation of the entered password (to avoid mistypes).
VPN server address
The IP or URL address of the PPTP or L2TP authentication server.
Page
122
of 197
Page 123 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
Encryption
Select a method of MPPE encryption.
•
No encrypt
: MPPE encryption is not applied.
•
MPPE 40/128 bit
: MPPE encryption with a 40-bit or 128-bit
key is applied.
•
MPPE 40 bit
: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit
: MPPE encryption with a 128-bit key is
applied.
MPPE encryption can be applied only if the
MS-CHAP
,
MS-
CHAP-V2
, or
AUTO
value is selected from the
Authentication
algorithm
drop-down list.
Authentication
algorithm
Select a required authentication method from the drop-down list or
leave the
AUTO
value.
MTU
The maximum size of units transmitted by the interface.
Keep Alive
Select the checkbox if you want the router to
keep you connected to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the
LCP interval
and
LCP fails
fields are available. Specify the required values.
Extra options
Advanced options of the pppd daemon which need to be specified
for this connection.
Optional
.
Dial on demand
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the
Maximum idle time
field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
Static IP Address
Fill in the field if you want to use a static IP address to access the
Internet.
PPP debug
Select the checkbox if you want to log
all data on PPP connection
debugging.
IP received
The IP address assigned by the ISP.
Page
123
of 197
Page 124 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 100. The page for creating a new connection. The
Miscellaneous
section.
Parameter
Description
Miscellaneous
Enable RIP
Select the checkbox to allow using RIP for this connection.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
When all needed settings are configured, click the
Save
button.
Page
124
of 197
Page 125 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
LAN
To configure the router's local interface, proceed to the
Net / LAN
page.
Figure 101. Basic settings of the local interface.
If needed, edit the basic settings of the local interface.
Parameter
Description
IP Address
The IP address of the router in the local subnet. By default, the
following value is specified:
192.168.0.1
.
Netmask
The mask of the local subnet. By default, the following value is
specified:
255.255.255.0
.
When needed settings are configured, click the
Save
button.
In the
DHCP server
section, you can configure the built-in DHCP server of the router.
Figure 102. The section for configuring the DHCP server.
Page
125
of 197

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top