1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-632
    5. /
  5. 22
Page 106 / 197 Scroll up to view Page 101 - 105
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Creating Dynamic IP WAN Connection
To create a connection of the Dynamic IP type, click the
Add
button on the
Net / WAN
page. On
the opened page, select the
Dynamic IP
value from the
Connection Type
drop-down list and
specify the needed values.
Figure 85. The page for creating a new connection. The
General settings
and
Ethernet
sections.
Parameter
Description
General settings
Provider
Leave the
Manually
value.
Port
A physical or virtual interface to which the new connection will be
assigned.
Select the
USB-WIMAX
value to assign this connection to the
WiMAX USB modem.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Ethernet
MTU
The maximum size of units transmitted by the interface.
Page
106
of 197
Page 107 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
MAC
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the
Clone MAC
Address
button (
) to set the
MAC address of the network interface card (of the computer that is
being used to configure the router at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
Figure 86. The page for creating a new connection. The
IP
and
Authorization via 802.1x protocol
sections.
Parameter
Description
IP
Obtain DNS server
addresses
automatically
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the
Primary DNS
server
and
Secondary DNS server
fields are not displayed.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page
107
of 197
Page 108 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
Vendor ID
The identifier of your ISP.
Optional
.
Authorization via 802.1x protocol
Authorization in the
ISP's network via
802.1x protocol
Select the checkbox to allow authorization in the ISP's network via
the 802.1x protocol.
Authentication method
Select a needed authentication method from the drop-down list.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Figure 87. The page for creating a new connection. The
Miscellaneous
section.
Parameter
Description
Miscellaneous
Enable RIP
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
When all needed settings are configured, click the
Save
button.
Page
108
of 197
Page 109 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Creating PPTP or L2TP WAN Connection
To create a connection of the PPTP or L2TP type, click the
Add
button on the
Net / WAN
page. On
the opened page, select the relevant value from the
Connection Type
drop-down list and specify
the needed values.
Figure 88. The page for creating a new connection. The
General settings
section.
Parameter
Description
General settings
Provider
Leave the
Manually
value.
Port
Leave the
auto
value.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Page
109
of 197
Page 110 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 89. The page for creating a new connection. The
VPN
section.
Parameter
Description
VPN
Connect automatically
Select the checkbox to enable auto-start of the connection upon the
boot-up of the router.
Username
A username (login) to access the server.
Without authorization
Select the checkbox if you don't need to enter a username and
password to access the server.
Password
A password to access the server.
Password confirmation
The confirmation of the entered password (to avoid mistypes).
VPN server address
The IP or URL address of the PPTP or L2TP authentication server.
Page
110
of 197

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top