Page 91 / 120
Scroll up to view Page 86 - 90
87
D-Link DIR-608 User Manual
Section 3 - Configuration
Help
The Help section provides documentation for each section of the web-based configuration utility.
Product Page: DIR-608
Hardware version:A1
Firmware version: 1.00
English
Select Language
▼
DIR-608
Setup
Wireless
Advanced
Maintenance
Status
Help
Menu
Setup
Wireless
Advanced
Maintenance
Status
Help Menu
•
Setup
•
Wireless
•
Advanced
•
Maintenance
•
Status
Setup Help
•
Wizard
•
Local Network
•
Internet Setup
•
IPV6
•
PPTP
•
L2TP
Wireless Help
•
Wireless Basics
•
WPS
•
Advanced Wireless
•
Wireless Repeater
Page 92 / 120
88
D-Link DIR-608 User Manual
Section 4 - Connecting to a Wireless Network
Connect a Wireless Client to Your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-608 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the DIR-608 for about 1 second. The wireless LED on the front will start to blink.
Step 3
- Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
WPS Button
Page 93 / 120
89
D-Link DIR-608 User Manual
Section 4 - Connecting to a Wireless Network
When connecting to the DIR-608 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-
Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the
default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and
password, or enter the Wi-Fi credentials set during the product configuration.
To join an existing network, locate the wireless network icon in the taskbar,
next to the time display and click on it.
Wireless Icon
Clicking on this icon will display a list of wireless networks which are within
range of your computer. Select the desired network by clicking on the SSID.
Windows® 10
Page 94 / 120
90
D-Link DIR-608 User Manual
Section 4 - Connecting to a Wireless Network
To connect to the SSID, click
Connect.
To automatically connect with the router when your device next detects the
SSID, click the
Connect Automatically
check box
.
You will then be prompted to enter the Wi-Fi password (network security key)
for the wireless network. Enter the password into the box and click
Next
to
connect to the network. Your computer will now automatically connect to this
wireless network when it is detected.
You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the
WPS button on your D-Link device and you will be automatically connected.
Page 95 / 120
91
D-Link DIR-608 User Manual
Section 4 - Connecting to a Wireless Network
Windows® 8
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.
To join an existing network, locate the wireless network icon in the taskbar
next to the time display.
Wireless Icon
Clicking on this icon will display a list of wireless networks that are within
connecting proximity of your computer. Select the desired network by clicking
on the network name.
19216811.live