Page 76 / 120
Scroll up to view Page 71 - 75
72
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Filter
IP/Port Filtering
IPv6 Filter
DIR-608
Advanced
Mainten
Default Action Status
Outgoing Default Action:
Permit
Deny
Incoming Default Action:
Permit
Deny
This page allows you to configure IPv6 filter rules that determine what kind of traffic is
allowed to pass through the network.
Default Action Status
Outgoing Default
Action:
Choose the default action for outgoing IPv6 traffic, either
Permit
or
Deny
. The default is
Permit
.
Incoming Default
Action:
Choose the default action for incoming IPv6 traffic, either
Permit
or
Deny
. The default is
Permit
.
Rule Configuration
Rule
Action:
Permit
Deny
Protocol:
IPv6
▼
Icmp6
Type:
PING6
▼
Direction:
Upstream
▼
Source
IPv6
Address:
Prefix
Length:
Dest IPv6
Address:
Prefix
Length:
SPort:
-
DPort:
-
Enable:
☑
Apply Changes
Reset
Help
Rule Configuration
Rule Action:
Select whether to
Permit
or
Deny
IPv6 traffic for this rule.
Protocol:
Select the protocol to apply the rule to:
IPv6
,
ICMP6
,
TCP
, or
UDP
.
ICMP6 Type:
If ICMP6 is selected
PING6
is the ICMP6 Type.
Direction:
Select whether to apply to rule to
Upstream
or
Downstream
traffic.
Source IPv6
Address & Prefix
Length:
Enter the source IPv6 address and prefix length to apply the rule to.
Dest IPv6 Address
& Prefix Length:
Enter the destination IPv6 address and prefix length to apply the
rule to.
SPort:
Enter the source port range, if applicable.
Page 77 / 120
73
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Filter (continued)
Current Filter Table
Rule Protocol
Source
IPv6/Prefix
SPort
Dest IPv6/
Prefix
DPort
Icmp6
Type:
State
Direction
Action
deny
ip6
eeee:
any
50
disable Downstream
enable
Delete
deny
ip6
ffff::
any
enable
Upstream
disable
Delete
Current Filter Table
The section displays the current IPv6 Filter Rules.
To enable or disable an IPv6 route filter, click its
disable
or
enable
button from the
Action
column.
To delete an IPv6 route filter, select it form the table and click the
Delete
button.
Click the
Apply Changes
to add your IPv6 filter.
DPort:
Enter the destination port range, if applicable.
Enable:
Check this box to enable the rule.
Rule Configuration
Rule
Action:
Permit
Deny
Protocol:
IPv6
▼
Icmp6
Type:
PING6
▼
Direction:
Upstream
▼
Source
IPv6
Address:
Prefix
Length:
Dest IPv6
Address:
Prefix
Length:
SPort:
-
DPort:
-
Enable:
☑
Apply Changes
Reset
Help
Page 78 / 120
74
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Routing
IPv6 Routing Configuration
IPv6 Routing
DIR-608
Advanced
Mainten
Configuration
Destination
Prefix Length
Next Hop
Interface
▼
Add Route
Delete Selected
This page allows you to you to define custom IPv6 routes to control how data traffic is moved
around your network.
Configuration
Destination:
This is the IPv6 address of the router used to reach the specified
destination.
Prefix Lenth:
Enter the IPv6 address prefix length of the packets that will take this
route.
Next Hop:
Enter your next hop gateway to be taken if this route is used.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click the
Add Route
to add your custom IPv6 route. It will be added to the
IPv6 Static
Route Table
.
IPv6 Static Route Table
Select
Destination
NextHop
Interface
IPv6 Static Route Table
The section displays the current IPv6 Static Route Table.
To delete an IPv6 route, select it from the IPv6 Static Route table and click the
Delete
Selected
button.
Page 79 / 120
75
D-Link DIR-608 User Manual
Section 3 - Configuration
Maintenance
The Maintenance tab provides access to administration related settings of your DIR-608.
Product Page: DIR-608
Hardware version:A1
Firmware version: 1.00
English
Select Language
▼
DIR-608
Setup
Wireless
Advanced
Maintenance
Status
Help
Reboot
Firmware Upgrade
Backup/Restore
Admin
Time and Date
To return to the Web UI Table of Contents page, simply click the D-Link logo on the top right
of each page.
Wizard
DIR-608
Setup
Wirele
Page 80 / 120
76
D-Link DIR-608 User Manual
Section 3 - Configuration
This page allows you to reboot your device with the current setting or reset it to the factory
default setting.
Reboot/Reset System
Click the
Reboot
button to reboot the system. To reset the system to the factory default
setting, click the
Reset
button.
Reboot
Reboot/Reset
Reboot
DIR-608
Maintenance
Statu
Reboot/Reset System
Reboot
Reset
19216811.live