1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-412
    5. /
  5. 8
Page 36 / 101 Scroll up to view Page 31 - 35
32
D-Link DIR-412 User Manual
Section 3 - Configuration
Select
Static IP
if your ISP assigned you
the IP address, subnet mask, gateway, and
DNS server addresses. In most cases, select
Dynamic IP
.
Enter the L2TP IP address supplied by your ISP
(Static IP only).
Enter the Subnet Mask supplied by your ISP
(Static L2TP only).
Enter the Gateway IP address provided by your
ISP (Static L2TP only).
Enter the Server IP address provided by your
ISP (optional).
Enter your L2TP user name.
Enter your L2TP password and then retype the
password in the next box.
Select either
Always-on
,
On-Demand
, or
Manual
.
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
User Name:
Password:
Reconnect Mode:
Choose
L2TP (Username/Password)
from the
My Internet Connection is
drop-down menu if your ISP uses an L2TP
connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
Manual Configuration (WAN Mode)
L2TP (Username/Password)
Page 37 / 101
33
D-Link DIR-412 User Manual
Section 3 - Configuration
Maximum Idle
Time:
DNS Servers:
MTU:
MAC Address:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1400 is
the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the
Clone Your PC’s
MAC Address
button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Page 38 / 101
34
D-Link DIR-412 User Manual
Section 3 - Configuration
Choose
Russia PPTP (Dual Access)
from the
My Internet Connection is
drop-down menu if your ISP uses a PPTP
connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
Select
Static IP
if your ISP assigned you
the IP address, subnet mask, gateway, and
DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address (Static PPTP only).
Enter the Subnet Mask (Static PPTP only).
Enter the Gateway IP address provided by your
ISP (Static PPTP only).
Enter the Server IP provided by your ISP
(optional).
Enter your PPTP username. Check the
MPPE
box to enable the MPPE encryption protocol
between the DIR-412 and PPTP server.
Enter your PPTP password and then retype the
password in the next box.
Select either
Always-on
,
On-Demand
, or
Manual
.
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
Username:
Password:
Reconnect Mode:
Manual Configuration (WAN Mode)
Russia PPTP (Dual Access)
Page 39 / 101
35
D-Link DIR-412 User Manual
Section 3 - Configuration
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).
Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1400 is
the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the
Clone Your PC’s
MAC Address
button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Maximum Idle
Time:
DNS Servers:
MTU:
MAC Address:
Page 40 / 101
36
D-Link DIR-412 User Manual
Section 3 - Configuration
Choose
Russia PPoE (Dual Access)
from the
My Internet Connection is
drop-down menu if your ISP uses a PPPoE
connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect
Mode:
Maximum Idle
Time:
Manual Configuration (WAN Mode)
Russia PPPoE (Dual Access)
Select
Static
if your ISP assigned you the IP
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name. Check the
MPPE
box to enable the MPPE encryption protocol
between the DIR-412 and PPPoE server.
Enter your PPPoE password and then retype
the password in the next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the
Internet connection is maintained during
inactivity. To disable this feature, enable
Auto-reconnect.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top