12

D-Link DIR-412 User Manual

Section 2 - Installation

If you are using a 3G USB dongle to connect to the Internet, please follow the steps below:

1. Move the toggle switch to the

3G Router

mode position and wait for the DIR-412 to reboot.

2. Insert your 3G USB dongle into the DIR-412’s 3G USB port.

3. Plug one end of Ethernet cable into the DIR-412, and the other end into your PC.

4. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 50 seconds for the router

to boot.

5. Verify the link lights on the router. The power light, Internet light, and the Wireless LAN light should be lit. If not,

make sure your computer and router are powered on and verify the cable connections are correct.

Connect to a 3G Internet Service

13

D-Link DIR-412 User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless router using the web-based configuration

utility.

Web-based Configuration Utility

To access the configuration utility, open a web-browser

such as Internet Explorer and enter the IP address of

the router (192.168.0.1).

Type

Admin

in the

User Name

field and then enter your

password. Leave the password blank by default.

Click the

Login

button to log in to the router.

If you get a

Page Cannot be Displayed

error, please

refer to the

Troubleshooting

section for assistance.

14

D-Link DIR-412 User Manual

Section 3 - Configuration

Internet Connection Setup Wizard (3G Mode)

Once logged into the web interface of the router, the

Setup > Internet

page will appear. Click the

Internet Connection

Setup Wizard

button to quickly configure your router using the setup wizard.

If you want to enter your settings without running the wizard, click

Manual Internet Connection Setup

and skip to

“Manual Configuration (3G Mode)”.

15

D-Link DIR-412 User Manual

Section 3 - Configuration

Click

Next

to continue.

Create a new password and then click

Next

to

continue.

Select your time zone from the drop-down menu and

then click

Next

to continue.

16

D-Link DIR-412 User Manual

Section 3 - Configuration

Configure your 3G Internet Connection settings and

then click

Next

to continue.

Click

Connect

to save your settings. Once the router

has finished rebooting, click

Continue

. Please allow

1-2 minutes to connect.