Page 56 / 114
Scroll up to view Page 51 - 55
51
D-Link DIR-330 User Manual
Section 3 - Configuration
System Settings
Use this option to save the current router
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save Configuration
button. You will then see
a file dialog, where you can select a location
and file name for the settings.
Use this option to load previously saved
router configuration settings. First, click the
Browse
button to find a previously save file of
configuration settings. Then, click the
Restore
Configuration from File
button to transfer
those settings to the router.
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the
Save Configuration
button
above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot the
DIR-330:
Page 57 / 114
52
D-Link DIR-330 User Manual
Section 3 - Configuration
After you have downloaded the new firmware,
click
Browse
to locate the firmware update
on your hard drive. Click
Save Settings
to
complete the firmware upgrade.
Browse:
Update Firmware
You can upgrade the firmware of the router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the D-Link support
D-Link support site.
Page 58 / 114
53
D-Link DIR-330 User Manual
Section 3 - Configuration
DDNS
Check the box to enable DDNS.
Choose your DDNS provider from the drop
down menu.
Enter you Host Name that you registered with
your DDNS service provider.
Enter the Username or Key for your DDNS
account.
Enter the Password or Key for your DDNS
account.
Reenter the password or key for your DDNS
account.
The default value is 240 (hours). Do not change
this value unless otherwise specified by you
DDNS service provider.
DDNS:
Server Address:
Host Name:
Username or Key:
Password or Key:
Verify Password or
Key:
Timeout:
DDNS (Dynamic Domain Name System) is a method of keeping a domain name linked to a changing IP Address.
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have
purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet
Service Providers assign dynamic IP addresses. Using a DDNS service provider, your friends can enter in your domain
name to connect to your server no matter what your IP address is.
Page 59 / 114
54
D-Link DIR-330 User Manual
Section 3 - Configuration
System Check
Enter the IP address that you wish to ping and
click the
Ping
button.
The results of your ping attempts will be
displayed here.
Ping Test:
Ping Results:
The router System Check uses a ping test to send ping packets to test if a computer in on the Internet.
Page 60 / 114
55
D-Link DIR-330 User Manual
Section 3 - Configuration
Schedules
Enter a name for your new schedule.
Select a day, a range of days, or All Week to
include every day.
Check
All Day - 24hrs
or enter a start and
end time for your schedule.
Click
Save
to save your schedule. You
must click
Save Settings
at the top for your
schedules to go into effect.
The list of schedules will be listed here. Click
the
Edit
icon to make changes or click the
Delete
icon to remove the schedule.
Name:
Days:
Time:
Save:
Schedule Rules
List:
This section is used to manage schedule rules for port forwarding, firewall rules, web filtering, and remote
management.
19216811.live