D-Link DIR-330 Router Manual PDF (Setup & Configuration Guide)

Page 51 / 114 Scroll up to view Page 46 - 50

46

D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Select a user group from the menu and click

the EDIT button to conﬁgure that group.

Enter a name for the user group. Click the

Clear the list below

button to erase all of

the user names and passwords for the user

group.

Enter the User Name.

Enter the Password.

Authentication

Database:

Group Name:

User Name:

Password:

User Groups

This section is used to conﬁgure Certiﬁcates that are used with an IPSec based VPN. You can conﬁgure local certiﬁcates

and the certiﬁcates of remote peers. Select one of the three options from the drop-down menu:

Local Certiﬁcate &

Private key

,

Certiﬁcate of Remote Peers

, or

Certiﬁcate Authorities

.

Page 52 / 114

47

D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Bandwidth Control

This section allows you to set bandwidth limits for speciﬁc IP addresses and/or applications.

Select a name for your bandwidth control

rule.

This dropdown box lets you select from a list

of common applications and ﬁlls in some of the

settings automatically for you after you select

an application, then click the

< <

button.

Select the port range to apply bandwidth

control to.

Select what type of trafﬁc to apply bandwidth

control to:

UDP

,

TCP

, or

All

.

Specify whether you want to limit

Upstream

,

Downstream

, or

All

bandwidth.

Enter the IP or Net Mask of the computers you

want to apply bandwidth control to.

Enter a transfer speed range you want to use

to control your bandwidth.

Name:

Application

Name:

Port Range:

Trafﬁc Type:

Direction:

LAN IP / Net

Mask:

Rate Range

(KBytes/Sec):

Page 53 / 114

48

D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Enter a login name to use for administrative

access to your router.

Enter a

New Password

for the administrator

login, and retype your password in

Conﬁrm

Password

. Only the administrator can make

changes to the settings.

You can also assign a User Group to have

administrative access to your router. To do

so, check the checkbox next to

Login Group

,

select one or more User Groups, then click the

> >

button to allow access to the User Group,

or use the

< <

button to remove access.

Login name:

New/Conﬁrm

Password:

Login Group:

Administrator Settings

This page will allow you to change the Administrator password. You can also enable Remote Management.

Page 54 / 114

49

D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Remote management allows the router to be

conﬁgured from the Internet by a web browser.

A username and password is still required

to access the Web-Management interface.

In general, only a member of your network

can browse the built-in web pages to perform

Administrator tasks. This feature enables you

to perform Administrator tasks from the remote

(Internet) host.

Enter the IP address of the remote computer.

You may enter

*

to allow a connection from any

Internet address.

The port number used to access the DIR-330.

Example: http://x.x.x.x:8080 whereas x.x.x.x

is the Internet

IP address of the DIR-330 and

8080 is the port used for the Web Management

interface. The schedule may be set to

Always

, which will allow the ﬁlter to always be

enabled. You can create your own times in the

Maintenance

>

Schedules

section.

Enable Remote

Management:

IP Address:

Port:

Administrator Settings

This page will allow you to change the Administrator password. You can also enable Remote Management.

Check this checkbox to enable SSL remote

login to your router.

Select a certiﬁcate to use for SSL. You can add

a new certiﬁcate by clicking

New

, which will take

you to the

Advanced > Certiﬁcates

page.

Enable SSL

Remote Login:

Certiﬁcate Select:

Page 55 / 114

50

D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Time and Date Settings

Select the Time Zone from the drop-down

menu.

Check the checkbox to enable daylight savings

time.

Click this button to copy the time settings from

your computer.

Check the box to use NTP (Network Time

Protocol) server. NTP synchronizes computer

clock times in a network of computers. This will

only connect to a server on the Internet, not a

local server.

Select an NTP server from the drop-down

menu.

To manually input the time, enter the values

in these ﬁelds for the Year, Month, Day, Hour,

Minute, and Second and then click

Save

Settings

.

Time Zone:

Enable Daylight

Saving:

Sync. Your

computer’s time

settings:

Automatic

Time and Date

Conﬁguration:

NTP Server Used:

Manual:

The Time and Date page allows you to conﬁgure, update, and maintain the correct time and date on the internal system

clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also

be conﬁgure to automatically adjust the time when needed.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share