Page 21 / 27
Scroll up to view Page 16 - 20
DIR-300NRU
Quick Installation Guide
Example of Connection via VLANs
If your ISP provides:
•
access to the Internet via the VLAN with the tag (VLAN ID)
2
, the
PPPoE
connection type, the login
user
, and the password
user_password
,
•
access to IPTV service via the VLAN with the tag (VLAN ID)
10
,
•
access to IP telephony via the VLAN with the tag (VLAN ID)
20
,
and your set-top box is connected to the LAN port 3, your VoIP phone is
connected to the LAN port 4 of the router, then follow the next steps to
configure the router.
1.
Go to the
Net / WAN
page, select the
WAN
connection and click the
Delete
button on the opened page.
2.
Go to the
Advanced / VLAN
page.
3.
Select the
lan
group.
4.
Select the line
port3
in the table at the bottom of the page and click the
Delete port
button.
5.
Select the line
port4
and click the
Delete port
button.
6.
Click the
Save changes
button.
7.
Select the
wan
group.
8.
In the
Name
filed, enter a name for the group (
INTERNET
).
9.
From the
Type
drop-down list, select the
NAT
value.
10.
From the
Port
drop-down list, select the value
port5
(corresponds to the
INTERNET port of the router).
11.
From the
Tag
drop-down list, select the
tagged
value.
12.
In the
VLAN ID
field, enter
2
.
13.
Click the
Save changes
button.
You have created the group of ports for connection to the Internet.
21
Page 22 / 27
DIR-300NRU
Quick Installation Guide
14.
Click the
Add
button.
15.
In the
Name
field, enter a name for the new group (
IPTV
).
16.
From the
Type
drop-down list, select the
Transparent
value.
17.
From the
Port
drop-down list, select the value
port3
.
18.
From the
Tag
drop-down list, select the
untagged
value.
19.
From the
Port
drop-down list, select the value
port5
.
20.
From the
Tag
drop-down list, select the
tagged
value.
21.
In the
VLAN ID
field, enter
10
.
22.
Click the
Save changes
button.
You have created the group of ports for IPTV service.
23.
Click the
Add
button.
24.
In the
Name
field, enter a name for the new group (
VOIP
).
25.
From the
Type
drop-down list, select the
Transparent
value.
26.
From the
Port
drop-down list, select the value
port4
.
27.
From the
Tag
drop-down list, select the
untagged
value.
28.
From the
Port
drop-down list, select the value
port5
.
29.
From the
Tag
drop-down list, select the
tagged
value.
30.
In the
VLAN ID
field, enter
20
.
31.
Click the
Save changes
button.
You have created the group of ports for access to IP telephony.
32. Click the
Save&Reboot
line in the top-page menu displayed when the
mouse pointer is over the
System
caption.
22
Page 23 / 27
DIR-300NRU
Quick Installation Guide
33.
Log into the web-based interface and go to the
Net / WAN
tab.
34.
Click the
Add
button.
35. On the opened page, select the
PPPoE
value from the
Connection
Type
drop-down list.
36.
From the
Port
drop-down list, select the value
Ports:5.2
.
37.
In the
Username
filed, enter
user
.
38.
Deselect the
Without authorization
checkbox.
39. In the
Password
and
Password confirmation
fields, enter
user_password
.
40.
Click the
Save
button.
23
Page 24 / 27
DIR-300NRU
Quick Installation Guide
Configuring Local Area Network
1.
Go to the
Net / LAN
page. If needed, change the IP address of the
router's LAN interface and the mask of the local subnet in the
IP
Address
and
Netmask
fields. Then click the
Save
button.
2.
By default, the DHCP server of the router is enabled. In the
DHCP
server
section, you can change the parameters of the DHCP server. If
you want to manually assign IP addresses to devices of your LAN, disable
the DHCP server (select the
Disable
value from the
Mode
drop-down
list).
3.
After specifying the DHCP server settings, click the
Save
button.
24
Page 25 / 27
DIR-300NRU
Quick Installation Guide
Configuring Wireless Network
By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.
Example of Wireless Settings
1.
Go to the
Wi-Fi / Security settings
page.
2.
Select the
WPA2-PSK
value from the
Network Authentication
drop-
down list.
3.
Enter a key (a password that will be used to access your wireless
network) in the
Encryption Key PSK
field. Use digits and Latin
characters.
4.
Select the
AES
value from the
WPA Encryption
drop-down list.
5.
Click the
Change
button.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
25
19216811.live