Page 6 / 27
Scroll up to view Page 1 - 5
DIR-300NRU
Quick Installation Guide
4.
Select the
Obtain an IP address automatically
and
Obtain DNS
server address automatically
radio buttons. Click the
OK
button.
5.
Click the
ОК
button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
6
Page 7 / 27
DIR-300NRU
Quick Installation Guide
Obtaining
IP
Address
Automatically
in OS Windows 7
1.
Click the
Start
button and proceed to the
Control Panel
window.
2.
Select the
Network and Sharing Center
section. (If the Control Panel
has the category view (the
Category
value is selected from the
View by
drop-down list in the top right corner of the window), choose the
View
network status and tasks
line under the
Network and Internet
section.)
3.
In the menu located on the left part of the window, select the
Change
adapter settings
line.
4.
In the opened window, right-click the relevant
Local Area Connection
icon and select the
Properties
line in the menu displayed.
5.
In the
Local Area Connection Properties
window, on the
Networking
tab, select the
Internet Protocol Version 4 (TCP/IPv4)
line. Click the
Properties
button.
7
Page 8 / 27
DIR-300NRU
Quick Installation Guide
6.
Select the
Obtain an IP address automatically
and
Obtain DNS
server address automatically
radio buttons. Click the
OK
button.
7.
Click the
OK
button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
8
Page 9 / 27
DIR-300NRU
Quick Installation Guide
PC with Wi-Fi Adapter
1.
Attach the antenna from the delivery package. To do this, remove the
antenna from its wrapper, attach it to the relevant connector on the back
panel of the router, and then screw the antenna in a clockwise direction to
the back panel. Position the antenna upward at its connecting joint. This
will ensure optimal operation of your wireless network.
2.
Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
3.
Turn on your PC and wait until your operating system is completely
loaded.
4.
Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
9
Page 10 / 27
DIR-300NRU
Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1.
Click the
Start
button and proceed to the
Control Panel > Network
and Internet Connections > Network Connections
window.
2.
Select the icon of the wireless network connection and make sure that
your Wi-Fi adapter is on.
3.
Search for available wireless networks.
4.
In the opened
Wireless Network Connection
window, select the
wireless network
DIR-300NRU
B5
and click the
Connect
button.
After that the
Wireless Network Connection Status
window appears.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
10
19216811.live