1µ

D-L±nk DIR-130 User Manual

Sect±on 3 - Configurat±on

Select

Dynamic IP (DHCP)

to obtain IP Address

information automatically from your ISP. Select

this option if your ISP does not give you any IP

numbers to use. This option is commonly used

for Cable modem services.

The Host Name is optional but may be required

by some ISPs.

The default MAC Address is set to the Internet

port’s physical interface MAC address on the

Broadband Router. It is not recommended that

you change the default MAC address unless

required by your ISP.

You can use the

Clone

Your PC’s MAC Address

button to replace

the Internet port’s MAC address with the MAC

address of your Ethernet card.

Enter the Primary and Secondary DNS server

IP address(es) assigned by your ISP.

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with

your specific ISP. 1500 is the default MTU.

My Internet

Connection:

Host Name:

MAC Address:

Manual Configuration

Dynamic (Cable)

DNS Addresses:

MTU:

1¶

D-L±nk DIR-130 User Manual

Sect±on 3 - Configurat±on

Select

PPPoE (Username/Password)

from the drop-down menu.

Select

Static

if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses. In most cases, select

Dynamic

.

Enter your PPPoE user name.

Enter your PPPoE password and then retype the password in the next

box.

Enter the ISP Service Name (optional).

Enter the IP address (Static PPPoE only).

The default MAC Address is set to the Internet port’s physical interface

MAC address on the Broadband Router. It is not recommended that you

change the default MAC address unless required by your ISP.

You can

use the

Clone MAC Address

button to replace the Internet port’s MAC

address with the MAC address of your Ethernet card.

Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature,

enable Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is

the default MTU.

Select either

Always-on

,

On-Demand

, or

Manual

.

My Internet

Connection:

Address Mode:

User Name:

Password:

Service Name:

IP Address:

MAC Address:

DNS Addresses:

Maximum Idle Time:

MTU:

Connect Mode:

Internet Setup

PPPoE (DSL)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide

you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE

software from your computer. The software is no longer needed and will not work through a router.

1·

D-L±nk DIR-130 User Manual

Sect±on 3 - Configurat±on

Select

Static

if your ISP assigned you the IP address, subnet

mask, gateway, and DNS server addresses. In most cases, select

Dynamic

.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server Addresses (Static

PPTP only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

Enter the Server IP provided by your ISP (optional).

Enter your PPTP account (username).

Enter your PPTP password and then retype the password in the

next box.

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1450 is the

default MTU.

Select either

Always-on

,

On-Demand

, or

Manual

.

Address Mode:

IP Address:

Subnet Mask:

Gateway:

DNS:

Server IP/Name:

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with

a username and password. This option is typically used for DSL services.

PPTP Account:

PPTP Password:

Maximum Idle

Time:

MTU:

Connect Mode:

1¸

D-L±nk DIR-130 User Manual

Sect±on 3 - Configurat±on

Select

Static

if your ISP assigned you the IP address, subnet

mask, gateway, and DNS server addresses. In most cases,

select

Dynamic

.

Enter the L2TP IP address supplied by your ISP (Static only).

Enter the Subnet Mask supplied by your ISP (Static only).

Enter the Gateway IP Address provided by your ISP.

Enter the Primary and Secondary DNS Server Addresses (Static

L2TP only).

Enter the Server IP provided by your ISP (optional).

Enter your L2TP account (username).

Enter your L2TP password and then retype the password in the

next box.

Enter a maximum idle time during which the Internet connection

is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1450 is

the default MTU.

Select either

Always-on

,

On-Demand

, or

Manual

.

Address Mode:

IP Address:

Subnet Mask:

Gateway:

DNS:

Server IP/Name:

L2TP Account:

L2TP Password:

Maximum Idle Time:

MTU:

Connect Mode:

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username

and password. This option is typically used for DSL services.

²0

D-L±nk DIR-130 User Manual

Sect±on 3 - Configurat±on

Select BigPond (Australia) from the drop-down

menu.

Enter your BigPond username.

Enter your BigPond password and then retype

the password in the next box.

Select the type of authentication server being

used from the drop-down menu.

Enter the IP address of the login server.

The default MAC Address is set to the

Internet’s physical interface MAC address on

the Broadband Router. It is not recommended

that you change the default MAC address

unless required by your ISP.

You can use the

Clone Your PC’s MAC Address

button to

replace the Internet port’s MAC address with

the MAC address of your Ethernet card.

My Internet

Connection:

Username:

Password:

Auth Server:

Login Server IP:

MAC Address:

Internet Setup

Big Pond (Australia)