Page 16 / 83
Scroll up to view Page 11 - 15
11
D-L±nk DIR-130 User Manual
Sect±on 3 - Configurat±on
Setup Wizard
You may click
Setup Wizard
to quickly configure your router.
If you want to enter your settings without running the wizard, click
Manual Configure
and skip to page 16.
Click
Launch Internet Connection Setup Wizard
to begin.
Page 17 / 83
1²
D-L±nk DIR-130 User Manual
Sect±on 3 - Configurat±on
Click
Next
to continue.
Create a new password and then click
Next
to continue.
Select your time zone from the drop-down menu and then click
Next
to continue.
Select the type of Internet connection you use and then click
Next
to continue.
Page 18 / 83
13
D-L±nk DIR-130 User Manual
Sect±on 3 - Configurat±on
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click
Clone Your PC’s MAC Address
and then click
Next
to continue.
The Host Name is optional but may be required by some ISPs. The default
host name is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next
to continue.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note:
Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next
to continue.
Page 19 / 83
1³
D-L±nk DIR-130 User Manual
Sect±on 3 - Configurat±on
If you selected L2TP, enter your L2TP username and password. Click
Next
to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click
Next
to continue.
If you selected Big Pond, select your authentication server from the drop
down menu. You will also need to enter your Big Pond username and
password. Click
Next
to continue.
Page 20 / 83
1´
D-L±nk DIR-130 User Manual
Sect±on 3 - Configurat±on
Click
Connect
to save your settings. Once the router is finished rebooting,
click
Continue
. Please allow 1-2 minutes to connect.
Close your browser window and reopen it to test your Internet connection.
It may take a few tries to initially connect to the Internet.
If you selected Russian PPPoE, enter your PPPoE username and password.
Click
Next
to continue.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note:
Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected Russian PPTP, enter your PPTP username and password.
Click
Next
to continue.
19216811.live