Page 36 / 155
Scroll up to view Page 31 - 35
36
Life Time
Enter in the life time value.
Life Time Unit
There are two units that can be selected: second and KB.
Proposal ID
The identifier of IKE proposal can be chosen for adding the
corresponding proposal to the dedicated tunnel.
Add
to
Click it to add the chosen proposal indicated by proposal ID
to IKE Proposal index list.
Using the Configuration Menu
Home > VPN Settings > Dynamic VPN Tunnel > Set IKE Proposal
Continued...
Page 37 / 155
37
Using the Configuration Menu
Home > VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal
IPSec Proposal
index
A list of selected proposal indexes from the IPSec proposal
pool listed below.
Proposal Name
DH Group
There are three groups that can be selected: group 1
(MODP768), group 2 (MODP1024), and group 5 (MODP1536).
Encap protocol
There are two protocols that can be selected: ESP and AH.
Encrypt algorithm
There are two algorithms that can be selected: 3DES and
DES.
This is the name used to classify the IPSec proposal.
Auth algorithm
There are two algorithms that can be selected: SHA1 and
MD5.
Page 38 / 155
38
Using the Configuration Menu
Home > VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal
Continued...
Life Time
Enter in a life time value.
Life Time Unit
There are two units that can be selected: second and KB.
Proposal ID
The identifier of IPSec proposal can be chosen for adding the
corresponding proposal to the dedicated tunnel.
Add
to
Click it to add the chosen proposal indicated by proposal ID
to IPSec Proposal index list.
Page 39 / 155
39
Home > VPN Settings > L2TP Server Setting
Using the Configuration Menu
Enable L2TP
Server
Click to enable the L2TP Server function.
Virtual IP of
L2TP Server
Enter your Virtual IP address to access the L2PT server.
Authentication
Protocol
Select one of the following authentication protocols: PAP,
CHAP, or MSCHAP.
Tunnel Name
Current tunnel name.
User Name
Password
Enter in the password for the L2TP account.
Enter in the username for the L2TP account.
Page 40 / 155
40
Home > VPN Settings > PPTP Server Setting
Using the Configuration Menu
Enable PPTP
Server
Click to enable the PPTP Server function.
Virtual IP of
PPTP Server
Enter your Virtual IP address to access thePPPT server.
Authentication
Protocol
Select one of the following authentication protocols: PAP,
CHAP, or MSCHAP.
Tunnel Name
Current tunnel name.
User Name
Password
Enter in the password for the PPTP account.
Enter in the username for the PPTP account.
19216811.live