D-Link DI-824VUP Router Manual PDF (Setup & Configuration Guide)

Page 21 / 155 Scroll up to view Page 16 - 20

21

Using the Configuration Menu

Home > WAN > Others > L2TP

L2TP password

Your L2TP password provided by your ISP.

L2TP Account

Your L2TP username provided by your ISP.

Subnet Mask

Subnet mask provided by your ISP.

Retype Password

Re-enter L2TP password.

Maximum Idle

Time

Set it to zero or enable Auto-reconnect to disable this feature. If

Auto-reconnect is enabled, this product will automatically con-

nect to the ISP after the router is restarted or connection is

dropped.

IP Address

IP address provided by your ISP.

Server IP

IP Address of LNS provided by your ISP.

Auto-Reconnect

If enabled, the Broadband Router will automatically connect to

your ISP after your system is restarted or if the connection is

dropped.

Layer 2 Tunneling Protocol(L2TP) is a WAN

connenction used in Israel.

Page 22 / 155

22

Using the Configuration Menu

Home > WAN > Others > BigPond Cable

User Name

Enter in the user name for the BigPond account.

Password

Enter the password for the BigPond account.

Login Server IP

(Optional) Enter the Login Server IP if required.

Dynamic IP Address for BigPond is a WAN connection used in Australia.

Auto-reconnect

If enabled, the Broadband Router will automatically connect to

your ISP after your system is restarted or if the connection is

dropped.

Auto-backup

Enabling this feature will connect your router to the Internet us-

ing a dial-up service if your broadband connection becomes un-

available. A subscription to a dial-up service is required for the

auto-backup to work.

Page 23 / 155

23

Home > LAN

Using the Configuration Menu

LAN is short for Local Area Network. This is considered your internal network. These are

the IP settings of the LAN interface for the DI-824VUP+. These settings may be referred

to as Private settings. You may change the LAN IP address if needed. The LAN IP ad-

dress is private to your internal network and cannot be seen on the Internet.

Domain Name

(Optional) The name of your local domain.

Subnet Mask

The subnet mask of the LAN interface.

The default subnet mask is

255.255.255.0

.

IP Address

The IP address of the LAN interface.

The default IP address is:

192.168.0.1

.

Page 24 / 155

24

Using the Configuration Menu

Home > DHCP

DHCP

stands for

Dynamic Host Control Protocol

. The DI-824VUP+ has a built-in DHCP

server. The DHCP Server will automatically assign an IP address to the computers on

the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your

computers on, they will automatically load the proper TCP/IP settings provided by the

DI-824VUP+. The DHCP Server will automatically allocate an unused IP address from

the IP address pool to the requesting computer. You must specify the starting and

ending address of the IP address pool.

Lease Time

The length of time for the DHCP lease.

DHCP Clients List

Lists the DHCP clients connected to the DI-824VUP+. Click

Re-

fresh

to update the list. The table will show the Host Name, IP

Address, and MAC Address of the DHCP client computer.

Enable or disable the DHCP service.

DHCP Server

Ending IP Address

The ending IP address for the DHCP server’s IP assignment.

Starting IP Address

The starting IP address for the DHCP server’s IP assignment.

Static DHCP

Used to allow the DHCP server to assign the same IP adress to a

specific MAC address. Enter the name, IP address, and MAC

address into the fields. Select which DHCP client to clone.

Page 25 / 155

25

Home > VPN Settings

Using the Configuration Menu

VPN Settings

are settings

that are used to create

virtual private tunnels to

remote VPN gateways. The

tunnel technology supports

data confidentiality, data

origin, authentication, and

data integrity of network

information by utilizing

encapsulation protocols,

encryption algorithms, and

hashing algorithms.

Max. number of

tunnels

Create a name for the tunnel.

NetBIOS broadcast

Click Enable to enable VPN tunnels. When you are not

using the VPN feature, it is best to keep VPN disabled.

VPN

Method

IPSec VPN supports two kinds of key-obtained methods:

manual key and automatic key exchange. Manual key

approach indicates that the two endpoint VPN gateways

require setting up authentication and encryption key by

the Administrator manually. However, IKE approach will

perform automatic Internet key exchange. Admins of both

endpoint gateways will only need to set the same

pre-shared key.

For more in depth configuration to adjust manual key or IKE

method settings, click

More.

More

Tunnel Name

Select the maximum number of allowable tunnels.

Enable this to allow NetBIOS braodcast over the VPN

tunnels.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share