Page 26 / 171
Scroll up to view Page 21 - 25
21
D-Link DHP-1565 User Manual
Section 3 - Configuration
Internet Connection Setup Wizard
Click the
Internet Connection Setup Wizard
button to start the Internet
Connection Setup Wizard.
Page 27 / 171
22
D-Link DHP-1565 User Manual
Section 3 - Configuration
Create a new password and then click
Next
to continue.
The following window appears, summarizing the steps required to
complete the
Internet Connection Setup Wizard
:
Click
Next
to continue.
Select your time zone from the drop-down menu and then click
Next
to
continue.
Page 28 / 171
23
D-Link DHP-1565 User Manual
Section 3 - Configuration
Select the type of Internet connection you use and then click
Next
to
continue.
If you selected
DHCP Connection (Dynamic IP Address)
, you may need to
enter the MAC address of the computer that was last connected directly
to your modem. If you are currently using that computer, click
Clone Your
PC’s MAC Address
and then click
Next
to continue.
The Host Name is optional but may be required by some ISPs. The default
host name is the device name of the router and may be changed.
Page 29 / 171
24
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you selected
PPPoE
, enter your PPPoE username and password.
If your ISP requires you to enter a PPPoE service name, enter the service
name in the
Service Name
field.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Click
Next
to continue.
Note:
Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected
PPTP
, enter your PPTP username and password.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and PPTP server addresses.
Click
Next
to continue.
Page 30 / 171
25
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you selected
L2TP
, enter your L2TP username and password.
Select
Static
if your ISP assigned you the IP address, subnet mask, gateway,
and L2TP server addresses.
Click
Next
to continue.
If you selected
Static
, enter your network settings supplied by your Internet
provider.
Click
Next
to continue.