1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DHP-1565
    5. /
  5. 5
Page 21 / 171 Scroll up to view Page 16 - 20
16
D-Link DHP-1565 User Manual
Section 1 - Product Overview
PowerLine Security
It is strongly recommended to encrypt your PowerLine network. By encrypting the data that is sent via your PowerLine adapters, you will prevent
nearby hackers with a Powerline adapter to connect to your network and steal your information.
To encrypt your PowerLine network, follow the steps below:
PowerLine Network-Quick Setup
The Common Connect Button is used to add a PowerLine AV device to a PowerLine network. You can allow the DHP-1565 to join a network by
pressing the Common Connect Button to toggle it to the Broadcast state or Join state.
The Common Connect Button has 3 different trigger states:
Broadcast state-
Enables the DHP-1565 to provide information for another PowerLine AV device to join its PowerLine network (works
even if it is the only device existing within the network group). The first PowerLine device will use this state when the Common
Connect Button is pressed.
Join State -
This allows an ungrouped PowerLine AV device to join an existing PowerLine network. PowerLine devices added after
the first device will be in the Join State when the Common Connect Button is pressed.
Ungroup State -
Hold down the Common Connect Button for more than 10 seconds to detach the device from its network group.
Encryption Button Usage
Page 22 / 171
17
D-Link DHP-1565 User Manual
Section 1 - Product Overview
Note:
A minimum of two PowerLine AV devices are required to create a network in order for your product to work properly.
Step 1
Plug the other PowerLine AV devices in the same room to verify if your home’s electrical wiring is suitable for the PowerLine Network. Once
configured you may place your PowerLine AV devices in the location of your choice. Plug one end of the Ethernet cable into the Ethernet port on
the PowerLine AV device.
Step 2
Press the
Common Connect Button
located on the back panel of the DHP-1565 for 1 to 3 seconds. The Power LED
will start blinking after
you release the button. Within 2 minutes of pushing the
Common Connect Button
on the DHP-1565, press the
Common Connect Button
on
the second PowerLine AV device(s) in your existing PowerLine network for 1 to 3 seconds. The Power LED
will start blinking after you release the
button. Network Connectivity is confirmed when the PowerLine LEDs
indicators on the DHP-1565 and PowerLine AV device are illuminated.
Step 3
After the network security setup steps, your PowerLine network will be securely configured with the same network encryption key. Place any
additional PowerLine AV devices in a different area of your home. The PowerLine AV devices will save the security settings even if they are unplugged.
Step 4
If your network has more than two PowerLine AV devices, press the
Common Connect Button
on the DHP-1565 for 1 to 3 seconds. Within 2
minutes of pushing the
Common Connect Button
on the DHP-1565, press the
Common Connect Button
on any additional PowerLine AV devices
in your existing PowerLine network for 1 to 3 seconds.
Network Connectivity is confirmed when the PowerLine LEDs indicators
on the DHP-1565 and PowerLine AV device are illuminated. After the
network security setup steps, you can place any additional PowerLine AV devices in a different area of your home. The PowerLine AV devices will
save the security settings even if they are unplugged.
PowerLine Network Device Setup
Page 23 / 171
18
D-Link DHP-1565 User Manual
Section 2 - Installation
The DHP-1565 includes Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through
the installation process.
Insert the
Setup Wizard CD
in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows
®
XP. The steps and screens are
similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to
Start
>
Run
. In the run box type“
D:\autorun.exe
” (where
D:
represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click
Start.
Getting Started
Page 24 / 171
19
D-Link DHP-1565 User Manual
Section 3 - Configuration
Configuration (Router Mode)
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as Internet
Explorer and enter http://dlinkrouter or the IP address of the router
(192.168.0.1).
Select
Admin
in the User Name field. Leave the password blank by default.
If you get a
Page Cannot be Displayed
error, please refer to the
Troubleshooting
section for assistance.
http://dlinkrouter
Page 25 / 171
20
D-Link DHP-1565 User Manual
Section 3 - Configuration
Internet
Setup
This section allows you to configure your Router’s Internet settings.
The Internet Connection Setup Wizard provides a quick
method for configuring your Internet settings. To start
the Internet Connection Setup Wizard, click the
Internet
Connection
Setup Wizard
button. Refer to “Internet
Connection Setup Wizard” on page 21 for more information
on how to use the Internet Connection Setup Wizard.
Click the
Manual Internet Connection Setup
button if
you want to enter your Internet settings without running
the Internet Connection Setup Wizard. Refer to “Manual
Internet Connection Setup”on page 27 for more information
on how to configure your Internet settings manually.
Internet
Connection
Setup Wizard:
Manual
Internet
Connection
Option:

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top