1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DHP-1565
    5. /
  5. 11
Page 51 / 171 Scroll up to view Page 46 - 50
46
D-Link DHP-1565 User Manual
Section 3 - Configuration
However, if the automatic detection fails, the user will be prompt to
either Try again or to click on the
Guide me through the IPv6 settings
button to initiate the manual continual of the wizard.
There are several connection types to choose from. If you are unsure
of your connection method, please contact your IPv6 Internet Service
Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE
client software on your computers has been removed or disabled. The 3
options available on this page are
IPv6overPPPoE,StaticIPv6address
and Route, and Tunneling Connection.
Choose the required IPv6 Internet Connection type and click on the
Next
button to continue. Click on the Prev button to return to the
previous page. Click on the
Cancel
button to discard all the changes
made and return to the main page.
Page 52 / 171
47
D-Link DHP-1565 User Manual
Section 3 - Configuration
After selecting the IPv6 over PPPoE option, the user will be able to
configure the IPv6 Internet connection that requires a username and
password to get online. Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session:
Username:
Password:
Verify Password:
Service Name:
Select the PPPoE Session value used here. This option
will state that this connection shares it’s information
with the already configured IPv6 PPPoE connection,
or the user can create a new PPPoE connection here.
Enter the PPPoE username used here. If you do not
know your user name, please contact your ISP.
Enter the PPPoE password used here. If you do not
know your password, please contact your ISP.
Re-enter the PPPoE password used here.
Enter the service name for this connection here. This
option is optional.
Click on the
Next
button to continue. Click on the
Prev
button to return to the previous page.
Click on the
Cancel
button to discard all the changes
made and return to the main page.
IPv6
IPv6 over PPPoE
Page 53 / 171
48
D-Link DHP-1565 User Manual
Section 3 - Configuration
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local
Address:
IPv6 Address:
Subnet Prefix
Length:
Default
Gateway:
Primary IPv6
DNS Address:
Secondary IPv6
DNS Address:
LAN IPv6
Address:
The Link-local address is used by nodes and routers
when communicating with neighboring nodes on the
same link. This mode enables IPv6- capable devices to
communicate with each other on the LAN side.
Enter the WAN IPv6 address for the router here.
Enter the WAN subnet prefix length value used here.
Enter the WAN default gateway IPv6 address used here.
Enter the WAN primary DNS Server address used here.
Enter the WAN secondary DNS Server address used here.
These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration is
based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)
Click on the
Next
button to continue. Click on the
Prev
button to return to the previous page.
Click on the
Cancel
button to discard all the changes made and return to the main page.
IPv6
Static IPv6
Page 54 / 171
49
D-Link DHP-1565 User Manual
Section 3 - Configuration
After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix:
IPv4 Address:
Assigned IPv6
Prefix:
6rd Border Relay
IPv4 Address:
IPv6 DNS Server:
Enter the 6rd IPv6 address and prefix value used here.
Enter the IPv4 address used here.
Displays the IPv6 assigned prefix value here.
Enter the 6rd border relay IPv4 address used here.
Enter the primary DNS Server address used here.
Click on the
Next
button to continue. Click on the
Prev
button to return to the previous page.
Click on the
Cancel
button to discard all the changes made and return to the main page.
The IPv6 Internet Connection Setup Wizard was completed.
Click on the Connect button to continue. Click on the
Prev
button to
return to the previous page.
Click on the
Cancel
button to discard all the changes made and return
to the main page.
IPv6
Tunneling Connection (6rd)
Page 55 / 171
50
D-Link DHP-1565 User Manual
Section 3 - Configuration
Displays the LAN IPv6 Link-Local address of the
router.
LAN IPv6 Address
Settings:
IPv6
Link-local Only
Select
Link-local Only
from the
My IPv6 Connection is
drop-down
menu if your Router will use the IPv6 link local method to connect to
the Internet.
Click the
Save Settings
button to save any changes made.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top