56

D-Link DHP-1565 User Manual

Section 3 - Configuration

IPv6 in IPv4 Tunneling

Select

IPv6 in IPv4 Tunnel

from the drop-down menu.

Enter the settings supplied by your Internet provider (ISP).

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconfiguration feature.

Select

Stateful (DHCPv6)

,

SLAAC + RDNSS

or

SLAAC + Stateless DHCPv6

.

Enter the start IPv6 Address for the DHCPv6 range for your local computers.

Enter the end IPv6 Address for the DHCPv6 range for your local computers.

Enter the Router Advertisement Lifetime (in minutes).

My IPv6 Connection:

IPv6 in IPv4 Tunnel

Settings:

LAN IPv6 Address:

LAN Link-Local

Address:

Enable

Autoconfiguration:

Autoconfiguration

Type:

IPv6 Address Range

Start:

IPv6 Address Range

End:

Pv6 Address Lifetime:

57

D-Link DHP-1565 User Manual

Section 3 - Configuration

6 to 4 Tunneling

Select

6 to 4

from the drop-down menu.

Enter the IPv6 settings supplied by your Internet provider (ISP).

Enter the primary and secondary DNS server addresses.

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconfiguration feature.

Select

Stateful (DHCPv6)

,

SLAAC + RDNSS

or

SLAAC + Stateless DHCPv6

.

Enter the start IPv6 Address for the DHCPv6 range for your local computers.

Enter the end IPv6 Address for the DHCPv6 range for your local computers.

Enter the IPv6 Address Lifetime (in minutes).

My IPv6 Connection:

6 to 4 Settings:

Primary/Secondary DNS

Address:

LAN IPv6 Address:

LAN Link-Local Address:

Enable

Autoconfiguration:

Autoconfiguration Type:

IPv6 Address Range

Start:

IPv6 Address Range

End:

IPv6 Address Lifetime:

58

D-Link DHP-1565 User Manual

Section 3 - Configuration

6rd

Select

6rd

from the drop-down menu.

Enter the address settings supplied by your Internet provider (ISP).

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconfiguration feature.

Select

Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6.

Enter the Router Advertisement Lifetime (in minutes).

My IPv6 Connection:

6RD Settings:

LAN IPv6 Address:

LAN Link-Local Address:

Enable Autoconfiguration:

Autoconfiguration Type:

Router Advertisement

Lifetime:

59

D-Link DHP-1565 User Manual

Section 3 - Configuration

This section will show you how to configure your new D-Link PowerLine AV using the web-based configuration utility.

PLC Settings (Router Mode)

60

D-Link DHP-1565 User Manual

Section 3 - Configuration

Network

Name:

Public

Network

Name:

Private

Network

Name:

Scan:

Add Member:

Device Name:

Password:

You can set the name of your network and to make it

either public or private. Make sure the Network Name of

all of the devices within your PowerLine network is the

same.

Select this option if you would like to make your powerline

network public with the default Network Name of

“HomePlugAV”. Since this is a commonly used Network

Name, it is less secure than a private Network Name.

Select this option if you wish to make your powerline

network more secure by using a private Network Name.

Type the name of your private PowerLine network in the

field.

Scan for new PowerLine devices.

This section lets you add new PowerLine AV devices to

your PowerLine network. To add a new device, give it a

Device Name and enter its Password, then click Add. When

you add a device it is given the current Network Name.

Type a name you wish to use to identify a specific

PowerLine AV device. For example, “Jack’s room”.

The Password is used to verify that you are authorized to

perform changes on a device. You can

find the Password printed on the back of your device.