D-Link DGS-3224TGR Router Manual PDF (Setup & Configuration Guide)

Page 146 / 160 Scroll up to view Page 141 - 145

DGS-3224TGR Gigabit Ethernet Switch User’s Guide

134

Group

Add to group

- add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a

password for authentication from the Candidate Switch before being added to the SIM group. Click

OK

to enter the

password or

Cancel

to exit the window.

Figure 7- 17. Input password window

Remove from Group

- remove an MS from the group.

Device

Configure

- will open the web manager for the specific device.

View

Refresh

- update the views with the latest status.

Topology

- display the Topology view.

Help

About

- Will display the SIM information, including the current SIM version.

NOTE:

Upon this firmware release, some functions of the SIM can only be

configured through the Command Line Interface. See the

DGS-3224TGR

Command Line Interface Reference Manual

for more information on

SIM and its configurations.

Page 147 / 160

DGS-3224TGR Gigabit Ethernet Switch User’s Guide

135

Firmware Upgrade

Figure 7- 18. Firmware Upgrade window

This window is used to upgrade firmware from the Commander Switch to the Member Switch. To access the

following window, click

Single IP Management > Firmware Upgrade

. Member Switches will be listed in the table

and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To

specify a certain Switch for firmware download, click its corresponding check box under the Port heading. To update

the firmware, enter the Server IP Address where the firmware resides and enter the Path/Filename of the firmware.

Click

Download

to initiate the file transfer

Configuration Backup/Restore

Figure 7- 19. Configuration Backup/Restore window

This window is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP

server. Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides),

MAC Address, Model Name and Version. To specify a certain Switch for upgrading configuration files, click its

corresponding radio button under the Port heading. To update the configuration file, enter the Server IP Address where the

file resides and enter the Path/Filename of the configuration file. Click

Download

to initiate the file transfer from a TFTP

server to the Switch. Click

Upload

to backup the configuration file to a TFTP server.

Page 148 / 160

DGS-3224TGR Gigabit Ethernet Switch User’s Guide

136

A

Technical Specifications

Transmission Method

Store-and-forward

RAM Buffer

2 MB per device

Packet Filtering/ Forwarding Rate

Full-wire speed for all connections.

1,488,095 pps per port (for 1000Mbps)

MAC Address Learning

Automatic update. Supports 16K MAC address.

Priority Queues

8 Priority Queues per port.

Forwarding Table Age Time

Max age: 10–1000000 seconds.

Default = 300.

AC inputs

100 – 240 VAC, 50/60 Hz (internal universal power supply)

Power Consumption

60 watts maximum

DC fans

4 built-in 40 x 40 x 10 mm fans

1 built-in 60 x 60 x 18 mm 5400 RPM fan blower

Operating Temperature

0 to 40 degrees Celsius

Storage Temperature

-25 to 55 degrees Celsius

Humidity

Storage: 5% to 95% non-condensing

Dimensions

441mm (W) x 309mm (D) x 44mm (H), 19-inch rack-mount width 1U

height

Weight

4 kg

EMI

FCC, CE Mark, C-Tick

Safety

CSA International

Page 149 / 160

DGS-3224TGR Gigabit Ethernet Switch User’s Guide

137

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3z Gigabit Ethernet

IEEE 802.1Q Tagged VLAN

IEEE 802.1P Tagged Packets

IEEE 802.3ab 1000BASE-T

IEEE 802.3x Full-duplex Flow Control

ANSI/IEEE 802.3 NWay auto-negotiation

Protocols

CSMA/CD

Data Transfer Rates

Ethernet:

Fast Ethernet:

Gigabit Ethernet:

Half duplex

Full duplex

10 Mbps

20 Mbps

100 Mbps

200 Mbps

2000 Mbps (Full duplex only)

Topology

Star

Network Cables

10BASE-T:

100BASE-TX:

1000BASE-T:

1000BASE-LX:

1000BASE-SX:

1000BASE-LHX:

1000BASE-ZX:

Mini-GBIC:

UTP Category 3, 4, 5 (100 meters max.)

EIA/TIA- 568 150-ohm STP (100 meters max.)

UTP Cat. 5 (100 meters max.)

EIA/TIA-568 150-ohm STP (100 meters max.)

UTP Cat. 5e (100 meters max.)

UTP Cat. 5 (100 meters max.)

EIA/TIA-568B 150-ohm STP (100 meters max.)

Single-mode fiber module (10km)

Multi-mode fiber module (550m)

Single-mode fiber module (40km)

Single-mode fiber module (80km)

SFP Transceiver for 1000BASE-LX

Single-mode fiber module (10km)

SFP Transceiver for 1000BASE-SX

Multi-mode fiber module (550m)

SFP Transceiver for 1000BASE-LHX

Single-mode fiber module (40km)

SFP Transceiver for 1000BASE-ZX

Single-mode fiber module (80km)

Number of Ports:

24 x 10/100/1000 Mbps ports

4 x GBIC combo ports

Page 150 / 160

DGS-3224TGR Gigabit Ethernet Switch User’s Guide

138

B

Cable Lengths

Use the following table to as a guide for the maximum cable lengths:

DEM-310GT: SFP Transceiver

for 1000BASE-LX, Single-mode

fiber module

10km

DEM-311GT: SFP Transceiver

for 1000BASE-SX, Multi-mode

fiber module

550m

DEM-314GT: SFP Transceiver

for

1000BASE-LHX,

Single-

mode fiber module

40km

Mini GBIC

DEM-315GT: SFP Transceiver

for 1000BASE-ZX, Single-mode

fiber module

80km

1000BASE-T

Category 5e UTP Cable

Category 5 UTP Cable

(1000 Mbps)

100m

100BASE-TX

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share