D-Link DGL-4500 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 108 Scroll up to view Page 16 - 20

±´

D-Link DGL-4500 User Manual

Section ³ - Conﬁguration

Setup Wizard

You may click

Setup.Wizard

to quickly conﬁgure your router.

If you want to enter your settings without running the wizard, click on

Internet

on the left side and then click

Manual.Conﬁgure

and skip

to page 20.

Click

Launch.Internet.Connection.Setup.Wizard

to begin.

If you want to conﬁgure your wireless settings, click

Launch.Wireless.

Security.Setup.Wizard

and skip to page 67.

Click

Page 22 / 108

±µ

D-Link DGL-4500 User Manual

Section ³ - Conﬁguration

Create a new password and then click

Select your time zone from the drop-down menu and then click

Select your ISP from the drop-down menu or select the type of Internet

connection you use and then click

Page 23 / 108

±¶

D-Link DGL-4500 User Manual

Section ³ - Conﬁguration

If you selected Dynamic, you may need to enter the MAC address of the

computer that was last connected directly to your modem. If you are currently

using that computer, click

Clone.Your.PC’s.MAC.Address

and then click

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Select

Static

if your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses.

Note:

Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click

Page 24 / 108

±·

D-Link DGL-4500 User Manual

Section ³ - Conﬁguration

If you selected L2TP, enter your L2TP username and password. Click

If you selected Static, enter your network settings supplied by your Internet

provider. Click

Click

Connect

to save your settings. Once the router is ﬁnished rebooting,

click

Continue

. Please allow 1-2 minutes to connect.

Close your browser window and reopen it to test your Internet connection.

It may take a few tries to initially connect to the Internet.

Page 25 / 108

²0

D-Link DGL-4500 User Manual

Section ³ - Conﬁguration

Select

Dynamic.IP.(DHCP)

to obtain IP Address

information automatically from your ISP. Select

this option if your ISP does not give you any IP

numbers to use. This option is commonly used for

Cable modem services.

Advanced Domanin Name System (DNS) services

enhances your internet performance by getting you

the information and web pages you are looking for

faster and more reliably. Additionally, it improves

your overall Internet experience by correcting many

common typo mistakes automatically, taking you

where you intended to go and saving you valuable

time.

Disclaimer:

D-Link makes no warranty as to the

availability, reliability, functionality and operation of

the Advanced DNS service of its features.

The Host Name is optional but may be required

by some ISPs.

Check the box if you are having problems obtaining

an IP address from your ISP.

Enter the Primary DNS server IP address assigned

by your ISP.

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with your

speciﬁc ISP. 1500 is the default MTU.

My Internet

Connection:

Host Name:

Manual Conﬁguration

Dynamic (Cable)

DNS Addresses:

MTU:

Use Unicasting:

Enable

Advanced DNS

Service:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share